This is an archive of the Maximo Yahoo Community. The content of this pages may be a sometimes obsolete so please check post dates.
Thanks to the community owner Christopher Wanko for providing the content.
Wow I would like to see something like that.
The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
----- Original Message -----
From: "Travis Herron" [therron@pcci.edu]
Sent: 05/03/2012 01:49 PM GMT
To: MAXIMO@yahoogroups.com
Subject: [MAXIMO List] Re: Application designer makes me want to stab my eyes out.
Don't know if this will help much, but I built a clone of WOTRACK that's tab driven (assuming we mean the same thing. . .I built it this way to kind of step people through the data entry. They go through a series of screens and the last screen reviews everything that was entered, and there they can submit the request).
Anyhow, what I did was leave the existing List tab as its own single solitary tab. Then inside that tab, I added a tabgroup with several tabs.
Travis Herron
--- In MAXIMO@yahoogroups.com, "hankinskeith@..." <keith.d.hankins@...> wrote:
>
> Ok. So I clone the 'CREATESR' application. I need to make it a tab driven screen. I see that when I show all controls, there is a tabgroup with an unlabled tab that all of the 'CREATESR' guts sit in.
>
> Perfect! I can just add a tab to that!
>
> Wrong, it makes the entire application show a blank page with only the upper banner of the screen if I try.
>
> Well, maybe this tab control that only shows up with show all controls is special since it doesnt show like all tab controls do... Lets try to add our own new tab control to the pre-existing application and drag all of the sections onto the tab. Nope! Everything on the screen except the tab control and its tabs are MIA when opening the application.
>
> Hmmm... perhaps I should create my own self service application and model it off of exactly what I see in the CREATESR application! I DID IT! I HAVE MY APPLICATION ALL SET UP ON SEPERATE TABS! Lets give it a whirl and see how the new app works.... Oh... whats this...everything is readonly? I cant delete a list tab if I dont need it? What gives?
>
> Can anyone help me figure out how to add a simple tab control to the CREATESR application without the world ending? MAX 6.2.7.
>
> Thanks!
>
Travis,
This is exactly what im trying to do... I dont know why it has to be so difficult. How can we facilitate an info share 8)
Thank you so much....
--- In MAXIMO@yahoogroups.com, ggutierrez@... wrote:
>
> Wow I would like to see something like that.
>
> The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
>
>
> ----- Original Message -----
> From: "Travis Herron" [therron@...]
> Sent: 05/03/2012 01:49 PM GMT
> To: MAXIMO@yahoogroups.com
> Subject: [MAXIMO List] Re: Application designer makes me want to stab my eyes out.
>
>
>
> Don't know if this will help much, but I built a clone of WOTRACK that's tab driven (assuming we mean the same thing. . .I built it this way to kind of step people through the data entry. They go through a series of screens and the last screen reviews everything that was entered, and there they can submit the request).
>
> Anyhow, what I did was leave the existing List tab as its own single solitary tab. Then inside that tab, I added a tabgroup with several tabs.
>
> Travis Herron
>
> --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> >
> > Ok. So I clone the 'CREATESR' application. I need to make it a tab driven screen. I see that when I show all controls, there is a tabgroup with an unlabled tab that all of the 'CREATESR' guts sit in.
> >
> > Perfect! I can just add a tab to that!
> >
> > Wrong, it makes the entire application show a blank page with only the upper banner of the screen if I try.
> >
> > Well, maybe this tab control that only shows up with show all controls is special since it doesnt show like all tab controls do... Lets try to add our own new tab control to the pre-existing application and drag all of the sections onto the tab. Nope! Everything on the screen except the tab control and its tabs are MIA when opening the application.
> >
> > Hmmm... perhaps I should create my own self service application and model it off of exactly what I see in the CREATESR application! I DID IT! I HAVE MY APPLICATION ALL SET UP ON SEPERATE TABS! Lets give it a whirl and see how the new app works.... Oh... whats this...everything is readonly? I cant delete a list tab if I dont need it? What gives?
> >
> > Can anyone help me figure out how to add a simple tab control to the CREATESR application without the world ending? MAX 6.2.7.
> >
> > Thanks!
> >
>
>
>
>
>
>
Actually, nevermind Travis, read a little further, will give the list tab advice a try, hadnt thought to do that, but I see why it might alleviate my headaches. Thanks!
--- In MAXIMO@yahoogroups.com, ggutierrez@... wrote:
>
> Wow I would like to see something like that.
>
> The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
>
>
> ----- Original Message -----
> From: "Travis Herron" [therron@...]
> Sent: 05/03/2012 01:49 PM GMT
> To: MAXIMO@yahoogroups.com
> Subject: [MAXIMO List] Re: Application designer makes me want to stab my eyes out.
>
>
>
> Don't know if this will help much, but I built a clone of WOTRACK that's tab driven (assuming we mean the same thing. . .I built it this way to kind of step people through the data entry. They go through a series of screens and the last screen reviews everything that was entered, and there they can submit the request).
>
> Anyhow, what I did was leave the existing List tab as its own single solitary tab. Then inside that tab, I added a tabgroup with several tabs.
>
> Travis Herron
>
> --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> >
> > Ok. So I clone the 'CREATESR' application. I need to make it a tab driven screen. I see that when I show all controls, there is a tabgroup with an unlabled tab that all of the 'CREATESR' guts sit in.
> >
> > Perfect! I can just add a tab to that!
> >
> > Wrong, it makes the entire application show a blank page with only the upper banner of the screen if I try.
> >
> > Well, maybe this tab control that only shows up with show all controls is special since it doesnt show like all tab controls do... Lets try to add our own new tab control to the pre-existing application and drag all of the sections onto the tab. Nope! Everything on the screen except the tab control and its tabs are MIA when opening the application.
> >
> > Hmmm... perhaps I should create my own self service application and model it off of exactly what I see in the CREATESR application! I DID IT! I HAVE MY APPLICATION ALL SET UP ON SEPERATE TABS! Lets give it a whirl and see how the new app works.... Oh... whats this...everything is readonly? I cant delete a list tab if I dont need it? What gives?
> >
> > Can anyone help me figure out how to add a simple tab control to the CREATESR application without the world ending? MAX 6.2.7.
> >
> > Thanks!
> >
>
>
>
>
>
>
After looking at this again, I dont think this will work for me. The CreateSR screen doesnt come designed with a list tab and data entry tab. Its one screen with a button that submits a data entry request.
Attempting to make everything fit into new tabs on this page makes blank screens.
It shouldnt be this hard to add an out of box control to a default screen. Application designer needs some serious work.....
--- In MAXIMO@yahoogroups.com, "hankinskeith@..." <keith.d.hankins@...> wrote:
>
> Actually, nevermind Travis, read a little further, will give the list tab advice a try, hadnt thought to do that, but I see why it might alleviate my headaches. Thanks!
>
> --- In MAXIMO@yahoogroups.com, ggutierrez@ wrote:
> >
> > Wow I would like to see something like that.
> >
> > The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
> >
> >
> > ----- Original Message -----
> > From: "Travis Herron" [therron@]
> > Sent: 05/03/2012 01:49 PM GMT
> > To: MAXIMO@yahoogroups.com
> > Subject: [MAXIMO List] Re: Application designer makes me want to stab my eyes out.
> >
> >
> >
> > Don't know if this will help much, but I built a clone of WOTRACK that's tab driven (assuming we mean the same thing. . .I built it this way to kind of step people through the data entry. They go through a series of screens and the last screen reviews everything that was entered, and there they can submit the request).
> >
> > Anyhow, what I did was leave the existing List tab as its own single solitary tab. Then inside that tab, I added a tabgroup with several tabs.
> >
> > Travis Herron
> >
> > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > >
> > > Ok. So I clone the 'CREATESR' application. I need to make it a tab driven screen. I see that when I show all controls, there is a tabgroup with an unlabled tab that all of the 'CREATESR' guts sit in.
> > >
> > > Perfect! I can just add a tab to that!
> > >
> > > Wrong, it makes the entire application show a blank page with only the upper banner of the screen if I try.
> > >
> > > Well, maybe this tab control that only shows up with show all controls is special since it doesnt show like all tab controls do... Lets try to add our own new tab control to the pre-existing application and drag all of the sections onto the tab. Nope! Everything on the screen except the tab control and its tabs are MIA when opening the application.
> > >
> > > Hmmm... perhaps I should create my own self service application and model it off of exactly what I see in the CREATESR application! I DID IT! I HAVE MY APPLICATION ALL SET UP ON SEPERATE TABS! Lets give it a whirl and see how the new app works.... Oh... whats this...everything is readonly? I cant delete a list tab if I dont need it? What gives?
> > >
> > > Can anyone help me figure out how to add a simple tab control to the CREATESR application without the world ending? MAX 6.2.7.
> > >
> > > Thanks!
> > >
> >
> >
> >
> >
> >
> >
>
I know; that's not what I said.
SR, and my clone of WOTRACK that I mentioned earlier, are made in a ONE TAB design. There's only a single, default tab. One tab in the tabgroup. And you are going to keep it that way.
Under that tab, the OOTB Create SR app puts a section control. I'm telling you to put a tabgroup there, before any section controls.
So if you exported the XML, it would look like:
1-presentation
2--page
3---clientarea
4----tabgroup (this is the OOTB existing tabgroup)
5-----tab (this one is the OOTB existing tab)
6------tabgroup (you are adding this)
7-------tab (you are adding this)
8--------section (or whatever -- start laying out your design)
9---------design design design
7-------tab (this is your second custom tab)
8--------section
9---------design design design
7-------tab
8--------section
Like this:
<?xml version="1.0" encoding="UTF-8" ?>
- <presentation id="createsr" mboname="SR" beanclass="psdi.webclient.beans.servicedesk.CreateSRSSAppBean" version="6.2.6">
- <page id="mainrec">
<include id="selfServicePageHeader" />
- <clientarea id="clientarea">
<appbar id="servreqs" />
- <tabgroup id="maintabs" format="carddeck">
- <tab id="results">
- <tabgroup id="mycustomtabgroup" format="carddeck">
- <tab id="mycustomtab1">
- <section id="main_grid1" border="true" label="Create Service Request">
Does that make sense?
Travis Herron
--- In MAXIMO@yahoogroups.com, "hankinskeith@..." <keith.d.hankins@...> wrote:
>
> After looking at this again, I dont think this will work for me. The CreateSR screen doesnt come designed with a list tab and data entry tab. Its one screen with a button that submits a data entry request.
>
> Attempting to make everything fit into new tabs on this page makes blank screens.
>
> It shouldnt be this hard to add an out of box control to a default screen. Application designer needs some serious work.....
>
> --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> >
> > Actually, nevermind Travis, read a little further, will give the list tab advice a try, hadnt thought to do that, but I see why it might alleviate my headaches. Thanks!
> >
> > --- In MAXIMO@yahoogroups.com, ggutierrez@ wrote:
> > >
> > > Wow I would like to see something like that.
> > >
> > > The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
> > >
> > >
> > > ----- Original Message -----
> > > From: "Travis Herron" [therron@]
> > > Sent: 05/03/2012 01:49 PM GMT
> > > To: MAXIMO@yahoogroups.com
> > > Subject: [MAXIMO List] Re: Application designer makes me want to stab my eyes out.
> > >
> > >
> > >
> > > Don't know if this will help much, but I built a clone of WOTRACK that's tab driven (assuming we mean the same thing. . .I built it this way to kind of step people through the data entry. They go through a series of screens and the last screen reviews everything that was entered, and there they can submit the request).
> > >
> > > Anyhow, what I did was leave the existing List tab as its own single solitary tab. Then inside that tab, I added a tabgroup with several tabs.
> > >
> > > Travis Herron
> > >
> > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > >
> > > > Ok. So I clone the 'CREATESR' application. I need to make it a tab driven screen. I see that when I show all controls, there is a tabgroup with an unlabled tab that all of the 'CREATESR' guts sit in.
> > > >
> > > > Perfect! I can just add a tab to that!
> > > >
> > > > Wrong, it makes the entire application show a blank page with only the upper banner of the screen if I try.
> > > >
> > > > Well, maybe this tab control that only shows up with show all controls is special since it doesnt show like all tab controls do... Lets try to add our own new tab control to the pre-existing application and drag all of the sections onto the tab. Nope! Everything on the screen except the tab control and its tabs are MIA when opening the application.
> > > >
> > > > Hmmm... perhaps I should create my own self service application and model it off of exactly what I see in the CREATESR application! I DID IT! I HAVE MY APPLICATION ALL SET UP ON SEPERATE TABS! Lets give it a whirl and see how the new app works.... Oh... whats this...everything is readonly? I cant delete a list tab if I dont need it? What gives?
> > > >
> > > > Can anyone help me figure out how to add a simple tab control to the CREATESR application without the world ending? MAX 6.2.7.
> > > >
> > > > Thanks!
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
Hi ,
I am trying to export /Import QBRs from one Environment to other. We exported REPORTDESIGN table ,and did export and import reports from test to dev.
QBRs were not imported.Please let me know if there is any step missing.
We are on Maximo7.5 environment.
Thanks
Deepika.
Thanks for the clarification. Perhaps we have some issues with our environment, this was the first thing I tried and I get wierdness in both application designer (I open the app, I have two tabs and no controls after putting 75+ controls under the tab I created, I add a section, and POOF all of my controls now appear on the screen. Save, come back in try to open it again and the same thing happens, two tabs, zero controls in view until I add a new control) and in the application itself (The application shows two blank tabs and zero controls under it, until I remove the tab control and everything is back to normal.)
I'm not very good with XML itself, perhaps I have somethign screwed up in my xml, not really sure how i'd know. Thanks for your replies.
--- In MAXIMO@yahoogroups.com, "Travis Herron" <therron@...> wrote:
>
> I know; that's not what I said.
>
> SR, and my clone of WOTRACK that I mentioned earlier, are made in a ONE TAB design. There's only a single, default tab. One tab in the tabgroup. And you are going to keep it that way.
>
> Under that tab, the OOTB Create SR app puts a section control. I'm telling you to put a tabgroup there, before any section controls.
>
> So if you exported the XML, it would look like:
> 1-presentation
> 2--page
> 3---clientarea
> 4----tabgroup (this is the OOTB existing tabgroup)
> 5-----tab (this one is the OOTB existing tab)
> 6------tabgroup (you are adding this)
> 7-------tab (you are adding this)
> 8--------section (or whatever -- start laying out your design)
> 9---------design design design
> 7-------tab (this is your second custom tab)
> 8--------section
> 9---------design design design
> 7-------tab
> 8--------section
>
>
> Like this:
> <?xml version="1.0" encoding="UTF-8" ?>
> - <presentation id="createsr" mboname="SR" beanclass="psdi.webclient.beans.servicedesk.CreateSRSSAppBean" version="6.2.6">
> - <page id="mainrec">
> <include id="selfServicePageHeader" />
> - <clientarea id="clientarea">
> <appbar id="servreqs" />
> - <tabgroup id="maintabs" format="carddeck">
> - <tab id="results">
> - <tabgroup id="mycustomtabgroup" format="carddeck">
> - <tab id="mycustomtab1">
> - <section id="main_grid1" border="true" label="Create Service Request">
>
>
> Does that make sense?
>
> Travis Herron
>
> --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> >
> > After looking at this again, I dont think this will work for me. The CreateSR screen doesnt come designed with a list tab and data entry tab. Its one screen with a button that submits a data entry request.
> >
> > Attempting to make everything fit into new tabs on this page makes blank screens.
> >
> > It shouldnt be this hard to add an out of box control to a default screen. Application designer needs some serious work.....
> >
> > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > >
> > > Actually, nevermind Travis, read a little further, will give the list tab advice a try, hadnt thought to do that, but I see why it might alleviate my headaches. Thanks!
> > >
> > > --- In MAXIMO@yahoogroups.com, ggutierrez@ wrote:
> > > >
> > > > Wow I would like to see something like that.
> > > >
> > > > The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Travis Herron" [therron@]
> > > > Sent: 05/03/2012 01:49 PM GMT
> > > > To: MAXIMO@yahoogroups.com
> > > > Subject: [MAXIMO List] Re: Application designer makes me want to stab my eyes out.
> > > >
> > > >
> > > >
> > > > Don't know if this will help much, but I built a clone of WOTRACK that's tab driven (assuming we mean the same thing. . .I built it this way to kind of step people through the data entry. They go through a series of screens and the last screen reviews everything that was entered, and there they can submit the request).
> > > >
> > > > Anyhow, what I did was leave the existing List tab as its own single solitary tab. Then inside that tab, I added a tabgroup with several tabs.
> > > >
> > > > Travis Herron
> > > >
> > > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > > >
> > > > > Ok. So I clone the 'CREATESR' application. I need to make it a tab driven screen. I see that when I show all controls, there is a tabgroup with an unlabled tab that all of the 'CREATESR' guts sit in.
> > > > >
> > > > > Perfect! I can just add a tab to that!
> > > > >
> > > > > Wrong, it makes the entire application show a blank page with only the upper banner of the screen if I try.
> > > > >
> > > > > Well, maybe this tab control that only shows up with show all controls is special since it doesnt show like all tab controls do... Lets try to add our own new tab control to the pre-existing application and drag all of the sections onto the tab. Nope! Everything on the screen except the tab control and its tabs are MIA when opening the application.
> > > > >
> > > > > Hmmm... perhaps I should create my own self service application and model it off of exactly what I see in the CREATESR application! I DID IT! I HAVE MY APPLICATION ALL SET UP ON SEPERATE TABS! Lets give it a whirl and see how the new app works.... Oh... whats this...everything is readonly? I cant delete a list tab if I dont need it? What gives?
> > > > >
> > > > > Can anyone help me figure out how to add a simple tab control to the CREATESR application without the world ending? MAX 6.2.7.
> > > > >
> > > > > Thanks!
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
>
Ill look at my xml a little, compare it to your example and see what I come up with. Thanks!
--- In MAXIMO@yahoogroups.com, "hankinskeith@..." <keith.d.hankins@...> wrote:
>
> Thanks for the clarification. Perhaps we have some issues with our environment, this was the first thing I tried and I get wierdness in both application designer (I open the app, I have two tabs and no controls after putting 75+ controls under the tab I created, I add a section, and POOF all of my controls now appear on the screen. Save, come back in try to open it again and the same thing happens, two tabs, zero controls in view until I add a new control) and in the application itself (The application shows two blank tabs and zero controls under it, until I remove the tab control and everything is back to normal.)
>
> I'm not very good with XML itself, perhaps I have somethign screwed up in my xml, not really sure how i'd know. Thanks for your replies.
>
> --- In MAXIMO@yahoogroups.com, "Travis Herron" <therron@> wrote:
> >
> > I know; that's not what I said.
> >
> > SR, and my clone of WOTRACK that I mentioned earlier, are made in a ONE TAB design. There's only a single, default tab. One tab in the tabgroup. And you are going to keep it that way.
> >
> > Under that tab, the OOTB Create SR app puts a section control. I'm telling you to put a tabgroup there, before any section controls.
> >
> > So if you exported the XML, it would look like:
> > 1-presentation
> > 2--page
> > 3---clientarea
> > 4----tabgroup (this is the OOTB existing tabgroup)
> > 5-----tab (this one is the OOTB existing tab)
> > 6------tabgroup (you are adding this)
> > 7-------tab (you are adding this)
> > 8--------section (or whatever -- start laying out your design)
> > 9---------design design design
> > 7-------tab (this is your second custom tab)
> > 8--------section
> > 9---------design design design
> > 7-------tab
> > 8--------section
> >
> >
> > Like this:
> > <?xml version="1.0" encoding="UTF-8" ?>
> > - <presentation id="createsr" mboname="SR" beanclass="psdi.webclient.beans.servicedesk.CreateSRSSAppBean" version="6.2.6">
> > - <page id="mainrec">
> > <include id="selfServicePageHeader" />
> > - <clientarea id="clientarea">
> > <appbar id="servreqs" />
> > - <tabgroup id="maintabs" format="carddeck">
> > - <tab id="results">
> > - <tabgroup id="mycustomtabgroup" format="carddeck">
> > - <tab id="mycustomtab1">
> > - <section id="main_grid1" border="true" label="Create Service Request">
> >
> >
> > Does that make sense?
> >
> > Travis Herron
> >
> > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > >
> > > After looking at this again, I dont think this will work for me. The CreateSR screen doesnt come designed with a list tab and data entry tab. Its one screen with a button that submits a data entry request.
> > >
> > > Attempting to make everything fit into new tabs on this page makes blank screens.
> > >
> > > It shouldnt be this hard to add an out of box control to a default screen. Application designer needs some serious work.....
> > >
> > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > >
> > > > Actually, nevermind Travis, read a little further, will give the list tab advice a try, hadnt thought to do that, but I see why it might alleviate my headaches. Thanks!
> > > >
> > > > --- In MAXIMO@yahoogroups.com, ggutierrez@ wrote:
> > > > >
> > > > > Wow I would like to see something like that.
> > > > >
> > > > > The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Travis Herron" [therron@]
> > > > > Sent: 05/03/2012 01:49 PM GMT
> > > > > To: MAXIMO@yahoogroups.com
> > > > > Subject: [MAXIMO List] Re: Application designer makes me want to stab my eyes out.
> > > > >
> > > > >
> > > > >
> > > > > Don't know if this will help much, but I built a clone of WOTRACK that's tab driven (assuming we mean the same thing. . .I built it this way to kind of step people through the data entry. They go through a series of screens and the last screen reviews everything that was entered, and there they can submit the request).
> > > > >
> > > > > Anyhow, what I did was leave the existing List tab as its own single solitary tab. Then inside that tab, I added a tabgroup with several tabs.
> > > > >
> > > > > Travis Herron
> > > > >
> > > > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > > > >
> > > > > > Ok. So I clone the 'CREATESR' application. I need to make it a tab driven screen. I see that when I show all controls, there is a tabgroup with an unlabled tab that all of the 'CREATESR' guts sit in.
> > > > > >
> > > > > > Perfect! I can just add a tab to that!
> > > > > >
> > > > > > Wrong, it makes the entire application show a blank page with only the upper banner of the screen if I try.
> > > > > >
> > > > > > Well, maybe this tab control that only shows up with show all controls is special since it doesnt show like all tab controls do... Lets try to add our own new tab control to the pre-existing application and drag all of the sections onto the tab. Nope! Everything on the screen except the tab control and its tabs are MIA when opening the application.
> > > > > >
> > > > > > Hmmm... perhaps I should create my own self service application and model it off of exactly what I see in the CREATESR application! I DID IT! I HAVE MY APPLICATION ALL SET UP ON SEPERATE TABS! Lets give it a whirl and see how the new app works.... Oh... whats this...everything is readonly? I cant delete a list tab if I dont need it? What gives?
> > > > > >
> > > > > > Can anyone help me figure out how to add a simple tab control to the CREATESR application without the world ending? MAX 6.2.7.
> > > > > >
> > > > > > Thanks!
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
>
This is what I have for XML. It appears to follow the outline you used in the prior threads. I think im doing this right, its just not displaying properly. My eye is untrained with XML however so I could be wrong....
<?xml version="1.0" encoding="UTF-8" ?>
- <presentation id="createsr" mboname="SR" beanclass="psdi.webclient.beans.servicedesk.CreateSRSSAppBean" version="6.2.7" originalapp="CREATESR">
- <page id="mainrec">
<include id="selfServicePageHeader" />
- <clientarea id="clientarea">
<appbar id="servreqs" />
- <tabgroup id="maintabs" format="carddeck">
- <tab id="results" type="INSERT">
- <tabgroup id="new_tabgroup">
- <tab id="new_tab" label="New Tab">
- <section id="main_grid1" border="true" label="Create Service Request">
- <sectionrow id="main_grid1_1">
- <sectioncol id="main_grid1_1_1_grid1">
- <section id="main_grid1_1_1_grid2">
<textbox id="main_grid1_1_1" dataattribute="reportedby" defaultfocus="true" lookup="personname" />
<textbox id="main_grid1_1_3" dataattribute="reportedphone" />
<textbox id="main_grid1_1_4" dataattribute="reportedemail" />
<textbox id="main_grid1_1_2" dataattribute="affectedperson" lookup="personname" />
</section>
</sectioncol>
- <sectioncol id="main_grid1_2_2">
- <section id="main_grid1_2_2_grid2">
<multiparttextbox id="main_grid1_1_2_1" dataattribute="assetnum" lookup="usercust2" menutype="ss_assetmain" applink="asset,ipc" descdataattribute="asset.description" descinputmode="readonly" desclongdescreadonly="true" />
<multiparttextbox id="main_grid1_1_2_2" dataattribute="location" lookup="locusercust2" menutype="ss_locations" applink="location,ipc" descdataattribute="location.description" descinputmode="readonly" desclongdescreadonly="true" />
<textbox id="main_grid1_1_2_3" dataattribute="reportedpriority" lookup="valuelist" />
<textbox id="main_grid1_1_2_4" dataattribute="reportdate" lookup="datelookup" />
</section>
</sectioncol>
</sectionrow>
</section>
</tab>
- <tab id="new_tabgroup_ctrl_tab" label="New Tab">
- <section id="createsr_grid2">
- <sectionrow id="main_grid2_1">
- <sectioncol id="main_grid2_1_1_grid1">
- <section id="main_grid2_1_1_grid2" label="Request Description" description="Please enter a summary and a more detailed description of your Service Request.">
<textbox id="main_grid2_1_1" dataattribute="description" />
<multilinetextbox id="main_grid2_1_2" title="Details:" dataattribute="description_longdescription" rows="7" columns="40" />
</section>
</sectioncol>
- <sectioncol id="main_grid3_1_1_grid3">
- <section id="main_grid3_1_2_grid3" label="Classify" description="Click the detail menu to classify your Service Request.">
<textbox id="main_grid3_1_1" dataattribute="CLASSSTRUCTURE.HIERARCHYPATH" menutype="classification" applink="assetcat" inputmode="readonly" />
<textbox id="main_grid3_1_2" dataattribute="CLASSSTRUCTURE.DESCRIPTION" inputmode="readonly" />
</section>
- <table id="attachments" inputmode="readonly" description="Click one of the buttons below to add an Attachment to your Service Request." label="Attachments" relationship="DOCLINKS" orderby="ownertable, doctype" beanclass="psdi.webclient.beans.doclinks.DocLinksBean">
- <tablebody id="attachments_tablebody" filterable="false" displayrowsperpage="5" filterexpanded="false">
<tablecol id="attachments_tablebody_2" dataattribute="document" />
<tablecol id="attachments_tablebody_3" dataattribute="docinfo.description" />
<tablecol id="attachments_tablebody_5" type="event" mxevent="toggledeleterow" mxevent_icon="btn_garbage.gif" mxevent_desc="Mark Row for Delete" sortable="false" filterable="false" />
</tablebody>
- <buttongroup id="attachments_grid7">
<pushbutton id="attachments_grid7_2" label="Attach File" mxevent="ssaddnewattachmentfile" />
<pushbutton id="attachments_grid7_3" label="Attach Web Page" mxevent="ssaddnewattachmentwww" />
</buttongroup>
</table>
</sectioncol>
</sectionrow>
- <buttongroup id="buttonrow">
<pushbutton id="attachments_1" label="Submit" default="true" mxevent="saverecord" />
<pushbutton id="attachments_2" label="Cancel" mxevent="startcenter" targetid="createsr" />
</buttongroup>
</section>
</tab>
</tabgroup>
</tab>
</tabgroup>
</clientarea>
<include id="pageFooter" />
</page>
- <dialog id="srsubmit" datasrc="MAINRECORD" allowcancel="false">
- <section id="srsubmit_grid1" label="Service Request {0} has been submitted. \nRecord your Service Request for future reference.">
- <sectionheader id="srsubmit_grid1_sectionheader" plaintext="true">
- <paramvalues id="srsubmit_grid1_sec_params" property="label">
<paramvalue id="srsubmit_grid1_sec_param_1" position="0" dataattribute="ticketid" />
</paramvalues>
</sectionheader>
</section>
- <buttongroup id="srsubmit_grid1_2">
<pushbutton id="srsubmit_2_1" label="View Details" default="true" mxevent="viewdetails" />
<pushbutton id="srsubmit_2_2" label="Return to Start Center" mxevent="startcenter" targetid="createsr" />
<pushbutton id="srsubmit_2_3" label="Create Another Service Request" mxevent="newrecord" />
</buttongroup>
</dialog>
</presentation>
--- In MAXIMO@yahoogroups.com, "hankinskeith@..." <keith.d.hankins@...> wrote:
>
> Ill look at my xml a little, compare it to your example and see what I come up with. Thanks!
>
> --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> >
> > Thanks for the clarification. Perhaps we have some issues with our environment, this was the first thing I tried and I get wierdness in both application designer (I open the app, I have two tabs and no controls after putting 75+ controls under the tab I created, I add a section, and POOF all of my controls now appear on the screen. Save, come back in try to open it again and the same thing happens, two tabs, zero controls in view until I add a new control) and in the application itself (The application shows two blank tabs and zero controls under it, until I remove the tab control and everything is back to normal.)
> >
> > I'm not very good with XML itself, perhaps I have somethign screwed up in my xml, not really sure how i'd know. Thanks for your replies.
> >
> > --- In MAXIMO@yahoogroups.com, "Travis Herron" <therron@> wrote:
> > >
> > > I know; that's not what I said.
> > >
> > > SR, and my clone of WOTRACK that I mentioned earlier, are made in a ONE TAB design. There's only a single, default tab. One tab in the tabgroup. And you are going to keep it that way.
> > >
> > > Under that tab, the OOTB Create SR app puts a section control. I'm telling you to put a tabgroup there, before any section controls.
> > >
> > > So if you exported the XML, it would look like:
> > > 1-presentation
> > > 2--page
> > > 3---clientarea
> > > 4----tabgroup (this is the OOTB existing tabgroup)
> > > 5-----tab (this one is the OOTB existing tab)
> > > 6------tabgroup (you are adding this)
> > > 7-------tab (you are adding this)
> > > 8--------section (or whatever -- start laying out your design)
> > > 9---------design design design
> > > 7-------tab (this is your second custom tab)
> > > 8--------section
> > > 9---------design design design
> > > 7-------tab
> > > 8--------section
> > >
> > >
> > > Like this:
> > > <?xml version="1.0" encoding="UTF-8" ?>
> > > - <presentation id="createsr" mboname="SR" beanclass="psdi.webclient.beans.servicedesk.CreateSRSSAppBean" version="6.2.6">
> > > - <page id="mainrec">
> > > <include id="selfServicePageHeader" />
> > > - <clientarea id="clientarea">
> > > <appbar id="servreqs" />
> > > - <tabgroup id="maintabs" format="carddeck">
> > > - <tab id="results">
> > > - <tabgroup id="mycustomtabgroup" format="carddeck">
> > > - <tab id="mycustomtab1">
> > > - <section id="main_grid1" border="true" label="Create Service Request">
> > >
> > >
> > > Does that make sense?
> > >
> > > Travis Herron
> > >
> > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > >
> > > > After looking at this again, I dont think this will work for me. The CreateSR screen doesnt come designed with a list tab and data entry tab. Its one screen with a button that submits a data entry request.
> > > >
> > > > Attempting to make everything fit into new tabs on this page makes blank screens.
> > > >
> > > > It shouldnt be this hard to add an out of box control to a default screen. Application designer needs some serious work.....
> > > >
> > > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > > >
> > > > > Actually, nevermind Travis, read a little further, will give the list tab advice a try, hadnt thought to do that, but I see why it might alleviate my headaches. Thanks!
> > > > >
> > > > > --- In MAXIMO@yahoogroups.com, ggutierrez@ wrote:
> > > > > >
> > > > > > Wow I would like to see something like that.
> > > > > >
> > > > > > The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
> > > > > >
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Travis Herron" [therron@]
> > > > > > Sent: 05/03/2012 01:49 PM GMT
> > > > > > To: MAXIMO@yahoogroups.com
> > > > > > Subject: [MAXIMO List] Re: Application designer makes me want to stab my eyes out.
> > > > > >
> > > > > >
> > > > > >
> > > > > > Don't know if this will help much, but I built a clone of WOTRACK that's tab driven (assuming we mean the same thing. . .I built it this way to kind of step people through the data entry. They go through a series of screens and the last screen reviews everything that was entered, and there they can submit the request).
> > > > > >
> > > > > > Anyhow, what I did was leave the existing List tab as its own single solitary tab. Then inside that tab, I added a tabgroup with several tabs.
> > > > > >
> > > > > > Travis Herron
> > > > > >
> > > > > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > > > > >
> > > > > > > Ok. So I clone the 'CREATESR' application. I need to make it a tab driven screen. I see that when I show all controls, there is a tabgroup with an unlabled tab that all of the 'CREATESR' guts sit in.
> > > > > > >
> > > > > > > Perfect! I can just add a tab to that!
> > > > > > >
> > > > > > > Wrong, it makes the entire application show a blank page with only the upper banner of the screen if I try.
> > > > > > >
> > > > > > > Well, maybe this tab control that only shows up with show all controls is special since it doesnt show like all tab controls do... Lets try to add our own new tab control to the pre-existing application and drag all of the sections onto the tab. Nope! Everything on the screen except the tab control and its tabs are MIA when opening the application.
> > > > > > >
> > > > > > > Hmmm... perhaps I should create my own self service application and model it off of exactly what I see in the CREATESR application! I DID IT! I HAVE MY APPLICATION ALL SET UP ON SEPERATE TABS! Lets give it a whirl and see how the new app works.... Oh... whats this...everything is readonly? I cant delete a list tab if I dont need it? What gives?
> > > > > > >
> > > > > > > Can anyone help me figure out how to add a simple tab control to the CREATESR application without the world ending? MAX 6.2.7.
> > > > > > >
> > > > > > > Thanks!
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
Got to thinking when I wrote that it wasnt displaying properly. I did a weblogic cache clear and everything now works. Thanks for helping me think this through!
--- In MAXIMO@yahoogroups.com, "hankinskeith@..." <keith.d.hankins@...> wrote:
>
> This is what I have for XML. It appears to follow the outline you used in the prior threads. I think im doing this right, its just not displaying properly. My eye is untrained with XML however so I could be wrong....
>
> <?xml version="1.0" encoding="UTF-8" ?>
> - <presentation id="createsr" mboname="SR" beanclass="psdi.webclient.beans.servicedesk.CreateSRSSAppBean" version="6.2.7" originalapp="CREATESR">
> - <page id="mainrec">
> <include id="selfServicePageHeader" />
> - <clientarea id="clientarea">
> <appbar id="servreqs" />
> - <tabgroup id="maintabs" format="carddeck">
> - <tab id="results" type="INSERT">
> - <tabgroup id="new_tabgroup">
> - <tab id="new_tab" label="New Tab">
> - <section id="main_grid1" border="true" label="Create Service Request">
> - <sectionrow id="main_grid1_1">
> - <sectioncol id="main_grid1_1_1_grid1">
> - <section id="main_grid1_1_1_grid2">
> <textbox id="main_grid1_1_1" dataattribute="reportedby" defaultfocus="true" lookup="personname" />
> <textbox id="main_grid1_1_3" dataattribute="reportedphone" />
> <textbox id="main_grid1_1_4" dataattribute="reportedemail" />
> <textbox id="main_grid1_1_2" dataattribute="affectedperson" lookup="personname" />
> </section>
> </sectioncol>
> - <sectioncol id="main_grid1_2_2">
> - <section id="main_grid1_2_2_grid2">
> <multiparttextbox id="main_grid1_1_2_1" dataattribute="assetnum" lookup="usercust2" menutype="ss_assetmain" applink="asset,ipc" descdataattribute="asset.description" descinputmode="readonly" desclongdescreadonly="true" />
> <multiparttextbox id="main_grid1_1_2_2" dataattribute="location" lookup="locusercust2" menutype="ss_locations" applink="location,ipc" descdataattribute="location.description" descinputmode="readonly" desclongdescreadonly="true" />
> <textbox id="main_grid1_1_2_3" dataattribute="reportedpriority" lookup="valuelist" />
> <textbox id="main_grid1_1_2_4" dataattribute="reportdate" lookup="datelookup" />
> </section>
> </sectioncol>
> </sectionrow>
> </section>
> </tab>
> - <tab id="new_tabgroup_ctrl_tab" label="New Tab">
> - <section id="createsr_grid2">
> - <sectionrow id="main_grid2_1">
> - <sectioncol id="main_grid2_1_1_grid1">
> - <section id="main_grid2_1_1_grid2" label="Request Description" description="Please enter a summary and a more detailed description of your Service Request.">
> <textbox id="main_grid2_1_1" dataattribute="description" />
> <multilinetextbox id="main_grid2_1_2" title="Details:" dataattribute="description_longdescription" rows="7" columns="40" />
> </section>
> </sectioncol>
> - <sectioncol id="main_grid3_1_1_grid3">
> - <section id="main_grid3_1_2_grid3" label="Classify" description="Click the detail menu to classify your Service Request.">
> <textbox id="main_grid3_1_1" dataattribute="CLASSSTRUCTURE.HIERARCHYPATH" menutype="classification" applink="assetcat" inputmode="readonly" />
> <textbox id="main_grid3_1_2" dataattribute="CLASSSTRUCTURE.DESCRIPTION" inputmode="readonly" />
> </section>
> - <table id="attachments" inputmode="readonly" description="Click one of the buttons below to add an Attachment to your Service Request." label="Attachments" relationship="DOCLINKS" orderby="ownertable, doctype" beanclass="psdi.webclient.beans.doclinks.DocLinksBean">
> - <tablebody id="attachments_tablebody" filterable="false" displayrowsperpage="5" filterexpanded="false">
> <tablecol id="attachments_tablebody_2" dataattribute="document" />
> <tablecol id="attachments_tablebody_3" dataattribute="docinfo.description" />
> <tablecol id="attachments_tablebody_5" type="event" mxevent="toggledeleterow" mxevent_icon="btn_garbage.gif" mxevent_desc="Mark Row for Delete" sortable="false" filterable="false" />
> </tablebody>
> - <buttongroup id="attachments_grid7">
> <pushbutton id="attachments_grid7_2" label="Attach File" mxevent="ssaddnewattachmentfile" />
> <pushbutton id="attachments_grid7_3" label="Attach Web Page" mxevent="ssaddnewattachmentwww" />
> </buttongroup>
> </table>
> </sectioncol>
> </sectionrow>
> - <buttongroup id="buttonrow">
> <pushbutton id="attachments_1" label="Submit" default="true" mxevent="saverecord" />
> <pushbutton id="attachments_2" label="Cancel" mxevent="startcenter" targetid="createsr" />
> </buttongroup>
> </section>
> </tab>
> </tabgroup>
> </tab>
> </tabgroup>
> </clientarea>
> <include id="pageFooter" />
> </page>
> - <dialog id="srsubmit" datasrc="MAINRECORD" allowcancel="false">
> - <section id="srsubmit_grid1" label="Service Request {0} has been submitted. \nRecord your Service Request for future reference.">
> - <sectionheader id="srsubmit_grid1_sectionheader" plaintext="true">
> - <paramvalues id="srsubmit_grid1_sec_params" property="label">
> <paramvalue id="srsubmit_grid1_sec_param_1" position="0" dataattribute="ticketid" />
> </paramvalues>
> </sectionheader>
> </section>
> - <buttongroup id="srsubmit_grid1_2">
> <pushbutton id="srsubmit_2_1" label="View Details" default="true" mxevent="viewdetails" />
> <pushbutton id="srsubmit_2_2" label="Return to Start Center" mxevent="startcenter" targetid="createsr" />
> <pushbutton id="srsubmit_2_3" label="Create Another Service Request" mxevent="newrecord" />
> </buttongroup>
> </dialog>
> </presentation>
>
> --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> >
> > Ill look at my xml a little, compare it to your example and see what I come up with. Thanks!
> >
> > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > >
> > > Thanks for the clarification. Perhaps we have some issues with our environment, this was the first thing I tried and I get wierdness in both application designer (I open the app, I have two tabs and no controls after putting 75+ controls under the tab I created, I add a section, and POOF all of my controls now appear on the screen. Save, come back in try to open it again and the same thing happens, two tabs, zero controls in view until I add a new control) and in the application itself (The application shows two blank tabs and zero controls under it, until I remove the tab control and everything is back to normal.)
> > >
> > > I'm not very good with XML itself, perhaps I have somethign screwed up in my xml, not really sure how i'd know. Thanks for your replies.
> > >
> > > --- In MAXIMO@yahoogroups.com, "Travis Herron" <therron@> wrote:
> > > >
> > > > I know; that's not what I said.
> > > >
> > > > SR, and my clone of WOTRACK that I mentioned earlier, are made in a ONE TAB design. There's only a single, default tab. One tab in the tabgroup. And you are going to keep it that way.
> > > >
> > > > Under that tab, the OOTB Create SR app puts a section control. I'm telling you to put a tabgroup there, before any section controls.
> > > >
> > > > So if you exported the XML, it would look like:
> > > > 1-presentation
> > > > 2--page
> > > > 3---clientarea
> > > > 4----tabgroup (this is the OOTB existing tabgroup)
> > > > 5-----tab (this one is the OOTB existing tab)
> > > > 6------tabgroup (you are adding this)
> > > > 7-------tab (you are adding this)
> > > > 8--------section (or whatever -- start laying out your design)
> > > > 9---------design design design
> > > > 7-------tab (this is your second custom tab)
> > > > 8--------section
> > > > 9---------design design design
> > > > 7-------tab
> > > > 8--------section
> > > >
> > > >
> > > > Like this:
> > > > <?xml version="1.0" encoding="UTF-8" ?>
> > > > - <presentation id="createsr" mboname="SR" beanclass="psdi.webclient.beans.servicedesk.CreateSRSSAppBean" version="6.2.6">
> > > > - <page id="mainrec">
> > > > <include id="selfServicePageHeader" />
> > > > - <clientarea id="clientarea">
> > > > <appbar id="servreqs" />
> > > > - <tabgroup id="maintabs" format="carddeck">
> > > > - <tab id="results">
> > > > - <tabgroup id="mycustomtabgroup" format="carddeck">
> > > > - <tab id="mycustomtab1">
> > > > - <section id="main_grid1" border="true" label="Create Service Request">
> > > >
> > > >
> > > > Does that make sense?
> > > >
> > > > Travis Herron
> > > >
> > > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > > >
> > > > > After looking at this again, I dont think this will work for me. The CreateSR screen doesnt come designed with a list tab and data entry tab. Its one screen with a button that submits a data entry request.
> > > > >
> > > > > Attempting to make everything fit into new tabs on this page makes blank screens.
> > > > >
> > > > > It shouldnt be this hard to add an out of box control to a default screen. Application designer needs some serious work.....
> > > > >
> > > > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > > > >
> > > > > > Actually, nevermind Travis, read a little further, will give the list tab advice a try, hadnt thought to do that, but I see why it might alleviate my headaches. Thanks!
> > > > > >
> > > > > > --- In MAXIMO@yahoogroups.com, ggutierrez@ wrote:
> > > > > > >
> > > > > > > Wow I would like to see something like that.
> > > > > > >
> > > > > > > The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
> > > > > > >
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Travis Herron" [therron@]
> > > > > > > Sent: 05/03/2012 01:49 PM GMT
> > > > > > > To: MAXIMO@yahoogroups.com
> > > > > > > Subject: [MAXIMO List] Re: Application designer makes me want to stab my eyes out.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Don't know if this will help much, but I built a clone of WOTRACK that's tab driven (assuming we mean the same thing. . .I built it this way to kind of step people through the data entry. They go through a series of screens and the last screen reviews everything that was entered, and there they can submit the request).
> > > > > > >
> > > > > > > Anyhow, what I did was leave the existing List tab as its own single solitary tab. Then inside that tab, I added a tabgroup with several tabs.
> > > > > > >
> > > > > > > Travis Herron
> > > > > > >
> > > > > > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > > > > > >
> > > > > > > > Ok. So I clone the 'CREATESR' application. I need to make it a tab driven screen. I see that when I show all controls, there is a tabgroup with an unlabled tab that all of the 'CREATESR' guts sit in.
> > > > > > > >
> > > > > > > > Perfect! I can just add a tab to that!
> > > > > > > >
> > > > > > > > Wrong, it makes the entire application show a blank page with only the upper banner of the screen if I try.
> > > > > > > >
> > > > > > > > Well, maybe this tab control that only shows up with show all controls is special since it doesnt show like all tab controls do... Lets try to add our own new tab control to the pre-existing application and drag all of the sections onto the tab. Nope! Everything on the screen except the tab control and its tabs are MIA when opening the application.
> > > > > > > >
> > > > > > > > Hmmm... perhaps I should create my own self service application and model it off of exactly what I see in the CREATESR application! I DID IT! I HAVE MY APPLICATION ALL SET UP ON SEPERATE TABS! Lets give it a whirl and see how the new app works.... Oh... whats this...everything is readonly? I cant delete a list tab if I dont need it? What gives?
> > > > > > > >
> > > > > > > > Can anyone help me figure out how to add a simple tab control to the CREATESR application without the world ending? MAX 6.2.7.
> > > > > > > >
> > > > > > > > Thanks!
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
Nothing's jumping out at me as wrong there, but my eyes are tired looking at it!
What browser version and JRE are you using?
--- In MAXIMO@yahoogroups.com, "hankinskeith@..." <keith.d.hankins@...> wrote:
>
> This is what I have for XML. It appears to follow the outline you used in the prior threads. I think im doing this right, its just not displaying properly. My eye is untrained with XML however so I could be wrong....
>
> <?xml version="1.0" encoding="UTF-8" ?>
> - <presentation id="createsr" mboname="SR" beanclass="psdi.webclient.beans.servicedesk.CreateSRSSAppBean" version="6.2.7" originalapp="CREATESR">
> - <page id="mainrec">
> <include id="selfServicePageHeader" />
> - <clientarea id="clientarea">
> <appbar id="servreqs" />
> - <tabgroup id="maintabs" format="carddeck">
> - <tab id="results" type="INSERT">
> - <tabgroup id="new_tabgroup">
> - <tab id="new_tab" label="New Tab">
> - <section id="main_grid1" border="true" label="Create Service Request">
> - <sectionrow id="main_grid1_1">
> - <sectioncol id="main_grid1_1_1_grid1">
> - <section id="main_grid1_1_1_grid2">
> <textbox id="main_grid1_1_1" dataattribute="reportedby" defaultfocus="true" lookup="personname" />
> <textbox id="main_grid1_1_3" dataattribute="reportedphone" />
> <textbox id="main_grid1_1_4" dataattribute="reportedemail" />
> <textbox id="main_grid1_1_2" dataattribute="affectedperson" lookup="personname" />
> </section>
> </sectioncol>
> - <sectioncol id="main_grid1_2_2">
> - <section id="main_grid1_2_2_grid2">
> <multiparttextbox id="main_grid1_1_2_1" dataattribute="assetnum" lookup="usercust2" menutype="ss_assetmain" applink="asset,ipc" descdataattribute="asset.description" descinputmode="readonly" desclongdescreadonly="true" />
> <multiparttextbox id="main_grid1_1_2_2" dataattribute="location" lookup="locusercust2" menutype="ss_locations" applink="location,ipc" descdataattribute="location.description" descinputmode="readonly" desclongdescreadonly="true" />
> <textbox id="main_grid1_1_2_3" dataattribute="reportedpriority" lookup="valuelist" />
> <textbox id="main_grid1_1_2_4" dataattribute="reportdate" lookup="datelookup" />
> </section>
> </sectioncol>
> </sectionrow>
> </section>
> </tab>
> - <tab id="new_tabgroup_ctrl_tab" label="New Tab">
> - <section id="createsr_grid2">
> - <sectionrow id="main_grid2_1">
> - <sectioncol id="main_grid2_1_1_grid1">
> - <section id="main_grid2_1_1_grid2" label="Request Description" description="Please enter a summary and a more detailed description of your Service Request.">
> <textbox id="main_grid2_1_1" dataattribute="description" />
> <multilinetextbox id="main_grid2_1_2" title="Details:" dataattribute="description_longdescription" rows="7" columns="40" />
> </section>
> </sectioncol>
> - <sectioncol id="main_grid3_1_1_grid3">
> - <section id="main_grid3_1_2_grid3" label="Classify" description="Click the detail menu to classify your Service Request.">
> <textbox id="main_grid3_1_1" dataattribute="CLASSSTRUCTURE.HIERARCHYPATH" menutype="classification" applink="assetcat" inputmode="readonly" />
> <textbox id="main_grid3_1_2" dataattribute="CLASSSTRUCTURE.DESCRIPTION" inputmode="readonly" />
> </section>
> - <table id="attachments" inputmode="readonly" description="Click one of the buttons below to add an Attachment to your Service Request." label="Attachments" relationship="DOCLINKS" orderby="ownertable, doctype" beanclass="psdi.webclient.beans.doclinks.DocLinksBean">
> - <tablebody id="attachments_tablebody" filterable="false" displayrowsperpage="5" filterexpanded="false">
> <tablecol id="attachments_tablebody_2" dataattribute="document" />
> <tablecol id="attachments_tablebody_3" dataattribute="docinfo.description" />
> <tablecol id="attachments_tablebody_5" type="event" mxevent="toggledeleterow" mxevent_icon="btn_garbage.gif" mxevent_desc="Mark Row for Delete" sortable="false" filterable="false" />
> </tablebody>
> - <buttongroup id="attachments_grid7">
> <pushbutton id="attachments_grid7_2" label="Attach File" mxevent="ssaddnewattachmentfile" />
> <pushbutton id="attachments_grid7_3" label="Attach Web Page" mxevent="ssaddnewattachmentwww" />
> </buttongroup>
> </table>
> </sectioncol>
> </sectionrow>
> - <buttongroup id="buttonrow">
> <pushbutton id="attachments_1" label="Submit" default="true" mxevent="saverecord" />
> <pushbutton id="attachments_2" label="Cancel" mxevent="startcenter" targetid="createsr" />
> </buttongroup>
> </section>
> </tab>
> </tabgroup>
> </tab>
> </tabgroup>
> </clientarea>
> <include id="pageFooter" />
> </page>
> - <dialog id="srsubmit" datasrc="MAINRECORD" allowcancel="false">
> - <section id="srsubmit_grid1" label="Service Request {0} has been submitted. \nRecord your Service Request for future reference.">
> - <sectionheader id="srsubmit_grid1_sectionheader" plaintext="true">
> - <paramvalues id="srsubmit_grid1_sec_params" property="label">
> <paramvalue id="srsubmit_grid1_sec_param_1" position="0" dataattribute="ticketid" />
> </paramvalues>
> </sectionheader>
> </section>
> - <buttongroup id="srsubmit_grid1_2">
> <pushbutton id="srsubmit_2_1" label="View Details" default="true" mxevent="viewdetails" />
> <pushbutton id="srsubmit_2_2" label="Return to Start Center" mxevent="startcenter" targetid="createsr" />
> <pushbutton id="srsubmit_2_3" label="Create Another Service Request" mxevent="newrecord" />
> </buttongroup>
> </dialog>
> </presentation>
>
> --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> >
> > Ill look at my xml a little, compare it to your example and see what I come up with. Thanks!
> >
> > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > >
> > > Thanks for the clarification. Perhaps we have some issues with our environment, this was the first thing I tried and I get wierdness in both application designer (I open the app, I have two tabs and no controls after putting 75+ controls under the tab I created, I add a section, and POOF all of my controls now appear on the screen. Save, come back in try to open it again and the same thing happens, two tabs, zero controls in view until I add a new control) and in the application itself (The application shows two blank tabs and zero controls under it, until I remove the tab control and everything is back to normal.)
> > >
> > > I'm not very good with XML itself, perhaps I have somethign screwed up in my xml, not really sure how i'd know. Thanks for your replies.
> > >
> > > --- In MAXIMO@yahoogroups.com, "Travis Herron" <therron@> wrote:
> > > >
> > > > I know; that's not what I said.
> > > >
> > > > SR, and my clone of WOTRACK that I mentioned earlier, are made in a ONE TAB design. There's only a single, default tab. One tab in the tabgroup. And you are going to keep it that way.
> > > >
> > > > Under that tab, the OOTB Create SR app puts a section control. I'm telling you to put a tabgroup there, before any section controls.
> > > >
> > > > So if you exported the XML, it would look like:
> > > > 1-presentation
> > > > 2--page
> > > > 3---clientarea
> > > > 4----tabgroup (this is the OOTB existing tabgroup)
> > > > 5-----tab (this one is the OOTB existing tab)
> > > > 6------tabgroup (you are adding this)
> > > > 7-------tab (you are adding this)
> > > > 8--------section (or whatever -- start laying out your design)
> > > > 9---------design design design
> > > > 7-------tab (this is your second custom tab)
> > > > 8--------section
> > > > 9---------design design design
> > > > 7-------tab
> > > > 8--------section
> > > >
> > > >
> > > > Like this:
> > > > <?xml version="1.0" encoding="UTF-8" ?>
> > > > - <presentation id="createsr" mboname="SR" beanclass="psdi.webclient.beans.servicedesk.CreateSRSSAppBean" version="6.2.6">
> > > > - <page id="mainrec">
> > > > <include id="selfServicePageHeader" />
> > > > - <clientarea id="clientarea">
> > > > <appbar id="servreqs" />
> > > > - <tabgroup id="maintabs" format="carddeck">
> > > > - <tab id="results">
> > > > - <tabgroup id="mycustomtabgroup" format="carddeck">
> > > > - <tab id="mycustomtab1">
> > > > - <section id="main_grid1" border="true" label="Create Service Request">
> > > >
> > > >
> > > > Does that make sense?
> > > >
> > > > Travis Herron
> > > >
> > > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > > >
> > > > > After looking at this again, I dont think this will work for me. The CreateSR screen doesnt come designed with a list tab and data entry tab. Its one screen with a button that submits a data entry request.
> > > > >
> > > > > Attempting to make everything fit into new tabs on this page makes blank screens.
> > > > >
> > > > > It shouldnt be this hard to add an out of box control to a default screen. Application designer needs some serious work.....
> > > > >
> > > > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > > > >
> > > > > > Actually, nevermind Travis, read a little further, will give the list tab advice a try, hadnt thought to do that, but I see why it might alleviate my headaches. Thanks!
> > > > > >
> > > > > > --- In MAXIMO@yahoogroups.com, ggutierrez@ wrote:
> > > > > > >
> > > > > > > Wow I would like to see something like that.
> > > > > > >
> > > > > > > The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
> > > > > > >
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Travis Herron" [therron@]
> > > > > > > Sent: 05/03/2012 01:49 PM GMT
> > > > > > > To: MAXIMO@yahoogroups.com
> > > > > > > Subject: [MAXIMO List] Re: Application designer makes me want to stab my eyes out.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Don't know if this will help much, but I built a clone of WOTRACK that's tab driven (assuming we mean the same thing. . .I built it this way to kind of step people through the data entry. They go through a series of screens and the last screen reviews everything that was entered, and there they can submit the request).
> > > > > > >
> > > > > > > Anyhow, what I did was leave the existing List tab as its own single solitary tab. Then inside that tab, I added a tabgroup with several tabs.
> > > > > > >
> > > > > > > Travis Herron
> > > > > > >
> > > > > > > --- In MAXIMO@yahoogroups.com, "hankinskeith@" <keith.d.hankins@> wrote:
> > > > > > > >
> > > > > > > > Ok. So I clone the 'CREATESR' application. I need to make it a tab driven screen. I see that when I show all controls, there is a tabgroup with an unlabled tab that all of the 'CREATESR' guts sit in.
> > > > > > > >
> > > > > > > > Perfect! I can just add a tab to that!
> > > > > > > >
> > > > > > > > Wrong, it makes the entire application show a blank page with only the upper banner of the screen if I try.
> > > > > > > >
> > > > > > > > Well, maybe this tab control that only shows up with show all controls is special since it doesnt show like all tab controls do... Lets try to add our own new tab control to the pre-existing application and drag all of the sections onto the tab. Nope! Everything on the screen except the tab control and its tabs are MIA when opening the application.
> > > > > > > >
> > > > > > > > Hmmm... perhaps I should create my own self service application and model it off of exactly what I see in the CREATESR application! I DID IT! I HAVE MY APPLICATION ALL SET UP ON SEPERATE TABS! Lets give it a whirl and see how the new app works.... Oh... whats this...everything is readonly? I cant delete a list tab if I dont need it? What gives?
> > > > > > > >
> > > > > > > > Can anyone help me figure out how to add a simple tab control to the CREATESR application without the world ending? MAX 6.2.7.
> > > > > > > >
> > > > > > > > Thanks!
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>