This is an archive of the Maximo Yahoo Community. The content of this pages may be a sometimes obsolete so please check post dates.
Thanks to the community owner Christopher Wanko for providing the content.
All the ones who implemented it are no longer with us. :(
The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
----- Original Message -----
From: "Shannon Rotz" [shannonrotz@yahoo.ca]
Sent: 02/09/2012 01:16 PM PST
To: <MAXIMO@yahoogroups.com>
Subject: RE: [MAXIMO List] PO Issue with workorder
Who helped implement Maximo at your site? You must have had someone
knowledgeable . or maybe it was a while ago?
From: MAXIMO@yahoogroups.com [mailto:MAXIMO@yahoogroups.com] On Behalf Of
George
Sent: February-09-12 1:00 PM
To: MAXIMO@yahoogroups.com
Subject: Re: [MAXIMO List] PO Issue with workorder
Only Maximo support I got is IBM.
--- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> , "Shannon
Rotz" <shannonrotz@...> wrote:
>
> Scratch that question - I re-read your original post.
>
>
>
> It should be default behaviour to be able to change the work order once
the
> PO has been un-approved. What happens if you go out of the PO screen, and
> then go back to the PO screen and find the PO again? Is it writable then?
>
>
>
> If not, you may have some extra security added to that field, although
> that's not as easy in 6.2.1 as it is in Maximo 7.
>
>
>
> Do you have a Maximo support person you can talk to?
>
>
>
>
>
>
>
> Shannon
>
>
>
> From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
[mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
Of
> Shannon Rotz
> Sent: February-09-12 12:30 PM
> To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> Subject: RE: [MAXIMO List] PO Issue with workorder
>
>
>
>
>
> Is there a storeroom specified?
>
> Shannon
>
> From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> Of
> George
> Sent: February-09-12 12:12 PM
> To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> Subject: Re: [MAXIMO List] PO Issue with workorder
>
> I changed the status of PO back to WAPPR and the workorder field is still
> greyed out. What else can I try?
>
> --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> Rotz" <shannonrotz@> wrote:
> >
> > Hi George: I'm not familiar with POPV - maybe it's a synonym for an
> > out-of-the-box status. If it's a synonym for APPR, then you will need to
> > have rights to un-approve the PO, i.e. change the status back to WAPPR.
> > After that, you can change the work order number.
> >
> >
> >
> >
> >
> > Shannon
> >
> >
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> Of
> > George
> > Sent: February-08-12 3:31 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > Subject: [MAXIMO List] PO Issue with workorder
> >
> >
> >
> >
> >
> > Hello everyone. How has everyone been?
> > I have a PO that has a status of 'POPV' (Purchase Order sent to Vendor).
> > The issue is that the workorder on the PO is no longer good because it
has
> a
> > status of 'CLOSE'. How can I remove the old workorder and and input the
> new
> > workorder that was created?
> > Hope someone can help me out.
> >
> > Maximo 6.2.1
> > SQL 2005
> > Weblogic
> >
> > thx,
> > mrggutz
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>
>
As far as I can remember, one cannot close a Work Order as long as it has an open PO associated with it. Am I missing something.
--- On Thu, 2/9/12, ggutierrez@pasadenarefining.com <ggutierrez@pasadenarefining.com> wrote:
From: ggutierrez@pasadenarefining.com <ggutierrez@pasadenarefining.com>
Subject: Re: [MAXIMO List] PO Issue with workorder
To: "MAXIMO" <MAXIMO@yahoogroups.com>
Date: Thursday, February 9, 2012, 3:18 PM
All the ones who implemented it are no longer with us. :(
The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
----- Original Message -----
From: "Shannon Rotz" [shannonrotz@yahoo.ca]
Sent: 02/09/2012 01:16 PM PST
To: <MAXIMO@yahoogroups.com>
Subject: RE: [MAXIMO List] PO Issue with workorder
Who helped implement Maximo at your site? You must have had someone
knowledgeable . or maybe it was a while ago?
From: MAXIMO@yahoogroups.com [mailto:MAXIMO@yahoogroups.com] On Behalf Of
George
Sent: February-09-12 1:00 PM
To: MAXIMO@yahoogroups.com
Subject: Re: [MAXIMO List] PO Issue with workorder
Only Maximo support I got is IBM.
--- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> , "Shannon
Rotz" <shannonrotz@...> wrote:
>
> Scratch that question - I re-read your original post.
>
>
>
> It should be default behaviour to be able to change the work order once
the
> PO has been un-approved. What happens if you go out of the PO screen, and
> then go back to the PO screen and find the PO again? Is it writable then?
>
>
>
> If not, you may have some extra security added to that field, although
> that's not as easy in 6.2.1 as it is in Maximo 7.
>
>
>
> Do you have a Maximo support person you can talk to?
>
>
>
>
>
>
>
> Shannon
>
>
>
> From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
[mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
Of
> Shannon Rotz
> Sent: February-09-12 12:30 PM
> To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> Subject: RE: [MAXIMO List] PO Issue with workorder
>
>
>
>
>
> Is there a storeroom specified?
>
> Shannon
>
> From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> Of
> George
> Sent: February-09-12 12:12 PM
> To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> Subject: Re: [MAXIMO List] PO Issue with workorder
>
> I changed the status of PO back to WAPPR and the workorder field is still
> greyed out. What else can I try?
>
> --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> Rotz" <shannonrotz@> wrote:
> >
> > Hi George: I'm not familiar with POPV - maybe it's a synonym for an
> > out-of-the-box status. If it's a synonym for APPR, then you will need to
> > have rights to un-approve the PO, i.e. change the status back to WAPPR.
> > After that, you can change the work order number.
> >
> >
> >
> >
> >
> > Shannon
> >
> >
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> Of
> > George
> > Sent: February-08-12 3:31 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > Subject: [MAXIMO List] PO Issue with workorder
> >
> >
> >
> >
> >
> > Hello everyone. How has everyone been?
> > I have a PO that has a status of 'POPV' (Purchase Order sent to Vendor).
> > The issue is that the workorder on the PO is no longer good because it
has
> a
> > status of 'CLOSE'. How can I remove the old workorder and and input the
> new
> > workorder that was created?
> > Hope someone can help me out.
> >
> > Maximo 6.2.1
> > SQL 2005
> > Weblogic
> >
> > thx,
> > mrggutz
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>
>
Hi,
We never had version 6 installed but I think the issue is the work order is now closed and the system cannot make any changes to the work order. Removing the WO from the PO the system may need to adjust the planned materials.
You'll need to have someone change the work order directly in the database to historyflag = 0 and status APPR. Then you should be able to change the PO and go back and close the WO. It's relatively easy to do but as always you should test this before doing it in production.
You can close a WO even if there is an open PO for that work order. That's the reason we do not allow any user to close a WO. They can only COMP complete a work order. Six months after the COMP status the system closes the work order. That way we can get all of the receipts and adjustments from invoices done before the close.
Dave Bone
--- In MAXIMO@yahoogroups.com, phanish bharadwaj <phanish_bharadwaj@...> wrote:
>
> As far as I can remember, one cannot close a Work Order as long as it has an open PO associated with it. Am I missing something.
>
> --- On Thu, 2/9/12, ggutierrez@... <ggutierrez@...> wrote:
>
>
> From: ggutierrez@... <ggutierrez@...>
> Subject: Re: [MAXIMO List] PO Issue with workorder
> To: "MAXIMO" <MAXIMO@yahoogroups.com>
> Date: Thursday, February 9, 2012, 3:18 PM
>
>
>
> Â
>
>
>
> All the ones who implemented it are no longer with us. :(
>
> The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
>
> ----- Original Message -----
> From: "Shannon Rotz" [shannonrotz@...]
> Sent: 02/09/2012 01:16 PM PST
> To: <MAXIMO@yahoogroups.com>
> Subject: RE: [MAXIMO List] PO Issue with workorder
>
> Who helped implement Maximo at your site? You must have had someone
> knowledgeable . or maybe it was a while ago?
>
> From: MAXIMO@yahoogroups.com [mailto:MAXIMO@yahoogroups.com] On Behalf Of
> George
> Sent: February-09-12 1:00 PM
> To: MAXIMO@yahoogroups.com
> Subject: Re: [MAXIMO List] PO Issue with workorder
>
> Only Maximo support I got is IBM.
>
> --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> Rotz" <shannonrotz@> wrote:
> >
> > Scratch that question - I re-read your original post.
> >
> >
> >
> > It should be default behaviour to be able to change the work order once
> the
> > PO has been un-approved. What happens if you go out of the PO screen, and
> > then go back to the PO screen and find the PO again? Is it writable then?
> >
> >
> >
> > If not, you may have some extra security added to that field, although
> > that's not as easy in 6.2.1 as it is in Maximo 7.
> >
> >
> >
> > Do you have a Maximo support person you can talk to?
> >
> >
> >
> >
> >
> >
> >
> > Shannon
> >
> >
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> Of
> > Shannon Rotz
> > Sent: February-09-12 12:30 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > Subject: RE: [MAXIMO List] PO Issue with workorder
> >
> >
> >
> >
> >
> > Is there a storeroom specified?
> >
> > Shannon
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > Of
> > George
> > Sent: February-09-12 12:12 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > Subject: Re: [MAXIMO List] PO Issue with workorder
> >
> > I changed the status of PO back to WAPPR and the workorder field is still
> > greyed out. What else can I try?
> >
> > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> > Rotz" <shannonrotz@> wrote:
> > >
> > > Hi George: I'm not familiar with POPV - maybe it's a synonym for an
> > > out-of-the-box status. If it's a synonym for APPR, then you will need to
> > > have rights to un-approve the PO, i.e. change the status back to WAPPR.
> > > After that, you can change the work order number.
> > >
> > >
> > >
> > >
> > >
> > > Shannon
> > >
> > >
> > >
> > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > Of
> > > George
> > > Sent: February-08-12 3:31 PM
> > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > Subject: [MAXIMO List] PO Issue with workorder
> > >
> > >
> > >
> > >
> > >
> > > Hello everyone. How has everyone been?
> > > I have a PO that has a status of 'POPV' (Purchase Order sent to Vendor).
> > > The issue is that the workorder on the PO is no longer good because it
> has
> > a
> > > status of 'CLOSE'. How can I remove the old workorder and and input the
> > new
> > > workorder that was created?
> > > Hope someone can help me out.
> > >
> > > Maximo 6.2.1
> > > SQL 2005
> > > Weblogic
> > >
> > > thx,
> > > mrggutz
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Thank you Dave I will give that a try.
Thank You,
George Gutierrez Jr.
Maximo Administration
Pasadena Refining Systems
713.920.3908 Direct
832.473.5330 Cell
U1O2 - Chave
"in2data"
<in2data@yahoo.com>
Sent by: To
MAXIMO@yahoogroups.c MAXIMO@yahoogroups.com
om cc
Subject
02/22/2012 10:35 AM Re: [MAXIMO List] PO Issue with
workorder
Please respond to
MAXIMO@yahoogroups.c
om
Hi,
We never had version 6 installed but I think the issue is the work order is
now closed and the system cannot make any changes to the work order.
Removing the WO from the PO the system may need to adjust the planned
materials.
You'll need to have someone change the work order directly in the database
to historyflag = 0 and status APPR. Then you should be able to change the
PO and go back and close the WO. It's relatively easy to do but as always
you should test this before doing it in production.
You can close a WO even if there is an open PO for that work order. That's
the reason we do not allow any user to close a WO. They can only COMP
complete a work order. Six months after the COMP status the system closes
the work order. That way we can get all of the receipts and adjustments
from invoices done before the close.
Dave Bone
--- In MAXIMO@yahoogroups.com, phanish bharadwaj <phanish_bharadwaj@...>
wrote:
>
> As far as I can remember, one cannot close a Work Order as long as it has
an open PO associated with it. Am I missing something.
>
> --- On Thu, 2/9/12, ggutierrez@... <ggutierrez@...> wrote:
>
>
> From: ggutierrez@... <ggutierrez@...>
> Subject: Re: [MAXIMO List] PO Issue with workorder
> To: "MAXIMO" <MAXIMO@yahoogroups.com>
> Date: Thursday, February 9, 2012, 3:18 PM
>
>
>
> Â
>
>
>
> All the ones who implemented it are no longer with us. :(
>
> The sender of this message is responsible for its content and addressing.
Any actions not conforming to Petrobras System internal policies are
forbidden.
>
> ----- Original Message -----
> From: "Shannon Rotz" [shannonrotz@...]
> Sent: 02/09/2012 01:16 PM PST
> To: <MAXIMO@yahoogroups.com>
> Subject: RE: [MAXIMO List] PO Issue with workorder
>
> Who helped implement Maximo at your site? You must have had someone
> knowledgeable . or maybe it was a while ago?
>
> From: MAXIMO@yahoogroups.com [mailto:MAXIMO@yahoogroups.com] On Behalf Of
> George
> Sent: February-09-12 1:00 PM
> To: MAXIMO@yahoogroups.com
> Subject: Re: [MAXIMO List] PO Issue with workorder
>
> Only Maximo support I got is IBM.
>
> --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ,
"Shannon
> Rotz" <shannonrotz@> wrote:
> >
> > Scratch that question - I re-read your original post.
> >
> >
> >
> > It should be default behaviour to be able to change the work order once
> the
> > PO has been un-approved. What happens if you go out of the PO screen,
and
> > then go back to the PO screen and find the PO again? Is it writable
then?
> >
> >
> >
> > If not, you may have some extra security added to that field, although
> > that's not as easy in 6.2.1 as it is in Maximo 7.
> >
> >
> >
> > Do you have a Maximo support person you can talk to?
> >
> >
> >
> >
> >
> >
> >
> > Shannon
> >
> >
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ] On
Behalf
> Of
> > Shannon Rotz
> > Sent: February-09-12 12:30 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > Subject: RE: [MAXIMO List] PO Issue with workorder
> >
> >
> >
> >
> >
> > Is there a storeroom specified?
> >
> > Shannon
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > Of
> > George
> > Sent: February-09-12 12:12 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > Subject: Re: [MAXIMO List] PO Issue with workorder
> >
> > I changed the status of PO back to WAPPR and the workorder field is
still
> > greyed out. What else can I try?
> >
> > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> > Rotz" <shannonrotz@> wrote:
> > >
> > > Hi George: I'm not familiar with POPV - maybe it's a synonym for an
> > > out-of-the-box status. If it's a synonym for APPR, then you will need
to
> > > have rights to un-approve the PO, i.e. change the status back to
WAPPR.
> > > After that, you can change the work order number.
> > >
> > >
> > >
> > >
> > >
> > > Shannon
> > >
> > >
> > >
> > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > Of
> > > George
> > > Sent: February-08-12 3:31 PM
> > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > Subject: [MAXIMO List] PO Issue with workorder
> > >
> > >
> > >
> > >
> > >
> > > Hello everyone. How has everyone been?
> > > I have a PO that has a status of 'POPV' (Purchase Order sent to
Vendor).
> > > The issue is that the workorder on the PO is no longer good because
it
> has
> > a
> > > status of 'CLOSE'. How can I remove the old workorder and and input
the
> > new
> > > workorder that was created?
> > > Hope someone can help me out.
> > >
> > > Maximo 6.2.1
> > > SQL 2005
> > > Weblogic
> > >
> > > thx,
> > > mrggutz
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>
>
>
>
>
>
>
It worked Dave thanks for the help :)
--- In MAXIMO@yahoogroups.com, ggutierrez@... wrote:
>
> Thank you Dave I will give that a try.
>
>
>
>
>
> Thank You,
>
> George Gutierrez Jr.
> Maximo Administration
> Pasadena Refining Systems
> 713.920.3908 Direct
> 832.473.5330 Cell
> U1O2 - Chave
>
>
>
> "in2data"
> <in2data@...>
> Sent by: To
> MAXIMO@... MAXIMO@yahoogroups.com
> om cc
>
> Subject
> 02/22/2012 10:35 AM Re: [MAXIMO List] PO Issue with
> workorder
>
> Please respond to
> MAXIMO@...
> om
>
>
>
>
>
>
>
>
>
> Hi,
>
> We never had version 6 installed but I think the issue is the work order is
> now closed and the system cannot make any changes to the work order.
> Removing the WO from the PO the system may need to adjust the planned
> materials.
>
> You'll need to have someone change the work order directly in the database
> to historyflag = 0 and status APPR. Then you should be able to change the
> PO and go back and close the WO. It's relatively easy to do but as always
> you should test this before doing it in production.
>
> You can close a WO even if there is an open PO for that work order. That's
> the reason we do not allow any user to close a WO. They can only COMP
> complete a work order. Six months after the COMP status the system closes
> the work order. That way we can get all of the receipts and adjustments
> from invoices done before the close.
>
> Dave Bone
>
> --- In MAXIMO@yahoogroups.com, phanish bharadwaj <phanish_bharadwaj@>
> wrote:
> >
> > As far as I can remember, one cannot close a Work Order as long as it has
> an open PO associated with it. Am I missing something.
> >
> > --- On Thu, 2/9/12, ggutierrez@ <ggutierrez@> wrote:
> >
> >
> > From: ggutierrez@ <ggutierrez@>
> > Subject: Re: [MAXIMO List] PO Issue with workorder
> > To: "MAXIMO" <MAXIMO@yahoogroups.com>
> > Date: Thursday, February 9, 2012, 3:18 PM
> >
> >
> >
> > Ã
> >
> >
> >
> > All the ones who implemented it are no longer with us. :(
> >
> > The sender of this message is responsible for its content and addressing.
> Any actions not conforming to Petrobras System internal policies are
> forbidden.
> >
> > ----- Original Message -----
> > From: "Shannon Rotz" [shannonrotz@]
> > Sent: 02/09/2012 01:16 PM PST
> > To: <MAXIMO@yahoogroups.com>
> > Subject: RE: [MAXIMO List] PO Issue with workorder
> >
> > Who helped implement Maximo at your site? You must have had someone
> > knowledgeable . or maybe it was a while ago?
> >
> > From: MAXIMO@yahoogroups.com [mailto:MAXIMO@yahoogroups.com] On Behalf Of
> > George
> > Sent: February-09-12 1:00 PM
> > To: MAXIMO@yahoogroups.com
> > Subject: Re: [MAXIMO List] PO Issue with workorder
> >
> > Only Maximo support I got is IBM.
> >
> > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ,
> "Shannon
> > Rotz" <shannonrotz@> wrote:
> > >
> > > Scratch that question - I re-read your original post.
> > >
> > >
> > >
> > > It should be default behaviour to be able to change the work order once
> > the
> > > PO has been un-approved. What happens if you go out of the PO screen,
> and
> > > then go back to the PO screen and find the PO again? Is it writable
> then?
> > >
> > >
> > >
> > > If not, you may have some extra security added to that field, although
> > > that's not as easy in 6.2.1 as it is in Maximo 7.
> > >
> > >
> > >
> > > Do you have a Maximo support person you can talk to?
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Shannon
> > >
> > >
> > >
> > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ] On
> Behalf
> > Of
> > > Shannon Rotz
> > > Sent: February-09-12 12:30 PM
> > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > > Subject: RE: [MAXIMO List] PO Issue with workorder
> > >
> > >
> > >
> > >
> > >
> > > Is there a storeroom specified?
> > >
> > > Shannon
> > >
> > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > > Of
> > > George
> > > Sent: February-09-12 12:12 PM
> > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > Subject: Re: [MAXIMO List] PO Issue with workorder
> > >
> > > I changed the status of PO back to WAPPR and the workorder field is
> still
> > > greyed out. What else can I try?
> > >
> > > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> > > Rotz" <shannonrotz@> wrote:
> > > >
> > > > Hi George: I'm not familiar with POPV - maybe it's a synonym for an
> > > > out-of-the-box status. If it's a synonym for APPR, then you will need
> to
> > > > have rights to un-approve the PO, i.e. change the status back to
> WAPPR.
> > > > After that, you can change the work order number.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Shannon
> > > >
> > > >
> > > >
> > > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > > Of
> > > > George
> > > > Sent: February-08-12 3:31 PM
> > > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > > Subject: [MAXIMO List] PO Issue with workorder
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Hello everyone. How has everyone been?
> > > > I have a PO that has a status of 'POPV' (Purchase Order sent to
> Vendor).
> > > > The issue is that the workorder on the PO is no longer good because
> it
> > has
> > > a
> > > > status of 'CLOSE'. How can I remove the old workorder and and input
> the
> > > new
> > > > workorder that was created?
> > > > Hope someone can help me out.
> > > >
> > > > Maximo 6.2.1
> > > > SQL 2005
> > > > Weblogic
> > > >
> > > > thx,
> > > > mrggutz
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>
I agree I use a similar setup with my clients, i.e. no one can close a
work order, and no one can close a PO. I have escalations running to close
both of them.
The PO gets closed if a) the status is APPR; b) CHANGEDATE < {current date}
xx days (usually 30 or 60); c) Receipts = COMPLETE; and d) all receipts
have been invoiced.
The Work order gets closed if a) status = COMP; b) CHANGEDATE < {current
date} xx days (usually 60 or 90); and c) there are no open Pos referencing
that work order.
It works quite well, although a bit of training is usually needed on the
topic of completing PO receipts. A lot of users dont realize that the
Complete Receipts function exists, and tend to resist the whole thing
until they are made aware of it.
Just my $.02 worth
Shannon
From: MAXIMO@yahoogroups.com [mailto:MAXIMO@yahoogroups.com] On Behalf Of
in2data
Sent: February-22-12 8:36 AM
To: MAXIMO@yahoogroups.com
Subject: Re: [MAXIMO List] PO Issue with workorder
Hi,
We never had version 6 installed but I think the issue is the work order is
now closed and the system cannot make any changes to the work order.
Removing the WO from the PO the system may need to adjust the planned
materials.
You'll need to have someone change the work order directly in the database
to historyflag = 0 and status APPR. Then you should be able to change the PO
and go back and close the WO. It's relatively easy to do but as always you
should test this before doing it in production.
You can close a WO even if there is an open PO for that work order. That's
the reason we do not allow any user to close a WO. They can only COMP
complete a work order. Six months after the COMP status the system closes
the work order. That way we can get all of the receipts and adjustments from
invoices done before the close.
Dave Bone
--- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> , phanish
bharadwaj <phanish_bharadwaj@...> wrote:
>
> As far as I can remember, one cannot close a Work Order as long as it has
an open PO associated with it. Am I missing something.
>
> --- On Thu, 2/9/12, ggutierrez@... <ggutierrez@...> wrote:
>
>
> From: ggutierrez@... <ggutierrez@...>
> Subject: Re: [MAXIMO List] PO Issue with workorder
> To: "MAXIMO" <MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> >
> Date: Thursday, February 9, 2012, 3:18 PM
>
>
>
> Â
>
>
>
> All the ones who implemented it are no longer with us. :(
>
> The sender of this message is responsible for its content and addressing.
Any actions not conforming to Petrobras System internal policies are
forbidden.
>
> ----- Original Message -----
> From: "Shannon Rotz" [shannonrotz@...]
> Sent: 02/09/2012 01:16 PM PST
> To: <MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> >
> Subject: RE: [MAXIMO List] PO Issue with workorder
>
> Who helped implement Maximo at your site? You must have had someone
> knowledgeable . or maybe it was a while ago?
>
> From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
[mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
Of
> George
> Sent: February-09-12 1:00 PM
> To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> Subject: Re: [MAXIMO List] PO Issue with workorder
>
> Only Maximo support I got is IBM.
>
> --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com> , "Shannon
> Rotz" <shannonrotz@> wrote:
> >
> > Scratch that question - I re-read your original post.
> >
> >
> >
> > It should be default behaviour to be able to change the work order once
> the
> > PO has been un-approved. What happens if you go out of the PO screen,
and
> > then go back to the PO screen and find the PO again? Is it writable
then?
> >
> >
> >
> > If not, you may have some extra security added to that field, although
> > that's not as easy in 6.2.1 as it is in Maximo 7.
> >
> >
> >
> > Do you have a Maximo support person you can talk to?
> >
> >
> >
> >
> >
> >
> >
> > Shannon
> >
> >
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> Of
> > Shannon Rotz
> > Sent: February-09-12 12:30 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> > Subject: RE: [MAXIMO List] PO Issue with workorder
> >
> >
> >
> >
> >
> > Is there a storeroom specified?
> >
> > Shannon
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > Of
> > George
> > Sent: February-09-12 12:12 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > Subject: Re: [MAXIMO List] PO Issue with workorder
> >
> > I changed the status of PO back to WAPPR and the workorder field is
still
> > greyed out. What else can I try?
> >
> > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> > Rotz" <shannonrotz@> wrote:
> > >
> > > Hi George: I'm not familiar with POPV - maybe it's a synonym for an
> > > out-of-the-box status. If it's a synonym for APPR, then you will need
to
> > > have rights to un-approve the PO, i.e. change the status back to
WAPPR.
> > > After that, you can change the work order number.
> > >
> > >
> > >
> > >
> > >
> > > Shannon
> > >
> > >
> > >
> > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > Of
> > > George
> > > Sent: February-08-12 3:31 PM
> > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > Subject: [MAXIMO List] PO Issue with workorder
> > >
> > >
> > >
> > >
> > >
> > > Hello everyone. How has everyone been?
> > > I have a PO that has a status of 'POPV' (Purchase Order sent to
Vendor).
> > > The issue is that the workorder on the PO is no longer good because it
> has
> > a
> > > status of 'CLOSE'. How can I remove the old workorder and and input
the
> > new
> > > workorder that was created?
> > > Hope someone can help me out.
> > >
> > > Maximo 6.2.1
> > > SQL 2005
> > > Weblogic
> > >
> > > thx,
> > > mrggutz
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>
>
>
>
>
>
>
I think Dave forgot one more database update:
Delete from assethistory where wonum = {work order that was re-opened}
Otherwise, if the work order is attached to an asset, you will have problems
re-closing the work order.
Shannon
From: MAXIMO@yahoogroups.com [mailto:MAXIMO@yahoogroups.com] On Behalf Of
George
Sent: February-22-12 5:21 PM
To: MAXIMO@yahoogroups.com
Subject: [MAXIMO List] Re: PO Issue with workorder
It worked Dave thanks for the help :)
--- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ,
ggutierrez@... wrote:
>
> Thank you Dave I will give that a try.
>
>
>
>
>
> Thank You,
>
> George Gutierrez Jr.
> Maximo Administration
> Pasadena Refining Systems
> 713.920.3908 Direct
> 832.473.5330 Cell
> U1O2 - Chave
>
>
>
> "in2data"
> <in2data@...>
> Sent by: To
> MAXIMO@... MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> om cc
>
> Subject
> 02/22/2012 10:35 AM Re: [MAXIMO List] PO Issue with
> workorder
>
> Please respond to
> MAXIMO@...
> om
>
>
>
>
>
>
>
>
>
> Hi,
>
> We never had version 6 installed but I think the issue is the work order
is
> now closed and the system cannot make any changes to the work order.
> Removing the WO from the PO the system may need to adjust the planned
> materials.
>
> You'll need to have someone change the work order directly in the database
> to historyflag = 0 and status APPR. Then you should be able to change the
> PO and go back and close the WO. It's relatively easy to do but as always
> you should test this before doing it in production.
>
> You can close a WO even if there is an open PO for that work order. That's
> the reason we do not allow any user to close a WO. They can only COMP
> complete a work order. Six months after the COMP status the system closes
> the work order. That way we can get all of the receipts and adjustments
> from invoices done before the close.
>
> Dave Bone
>
> --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> , phanish
bharadwaj <phanish_bharadwaj@>
> wrote:
> >
> > As far as I can remember, one cannot close a Work Order as long as it
has
> an open PO associated with it. Am I missing something.
> >
> > --- On Thu, 2/9/12, ggutierrez@ <ggutierrez@> wrote:
> >
> >
> > From: ggutierrez@ <ggutierrez@>
> > Subject: Re: [MAXIMO List] PO Issue with workorder
> > To: "MAXIMO" <MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> >
> > Date: Thursday, February 9, 2012, 3:18 PM
> >
> >
> >
> > Ã
> >
> >
> >
> > All the ones who implemented it are no longer with us. :(
> >
> > The sender of this message is responsible for its content and
addressing.
> Any actions not conforming to Petrobras System internal policies are
> forbidden.
> >
> > ----- Original Message -----
> > From: "Shannon Rotz" [shannonrotz@]
> > Sent: 02/09/2012 01:16 PM PST
> > To: <MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> >
> > Subject: RE: [MAXIMO List] PO Issue with workorder
> >
> > Who helped implement Maximo at your site? You must have had someone
> > knowledgeable . or maybe it was a while ago?
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
[mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
Of
> > George
> > Sent: February-09-12 1:00 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > Subject: Re: [MAXIMO List] PO Issue with workorder
> >
> > Only Maximo support I got is IBM.
> >
> > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com> ,
> "Shannon
> > Rotz" <shannonrotz@> wrote:
> > >
> > > Scratch that question - I re-read your original post.
> > >
> > >
> > >
> > > It should be default behaviour to be able to change the work order
once
> > the
> > > PO has been un-approved. What happens if you go out of the PO screen,
> and
> > > then go back to the PO screen and find the PO again? Is it writable
> then?
> > >
> > >
> > >
> > > If not, you may have some extra security added to that field, although
> > > that's not as easy in 6.2.1 as it is in Maximo 7.
> > >
> > >
> > >
> > > Do you have a Maximo support person you can talk to?
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Shannon
> > >
> > >
> > >
> > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com> ] On
> Behalf
> > Of
> > > Shannon Rotz
> > > Sent: February-09-12 12:30 PM
> > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> > > Subject: RE: [MAXIMO List] PO Issue with workorder
> > >
> > >
> > >
> > >
> > >
> > > Is there a storeroom specified?
> > >
> > > Shannon
> > >
> > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > > Of
> > > George
> > > Sent: February-09-12 12:12 PM
> > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > Subject: Re: [MAXIMO List] PO Issue with workorder
> > >
> > > I changed the status of PO back to WAPPR and the workorder field is
> still
> > > greyed out. What else can I try?
> > >
> > > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> > > Rotz" <shannonrotz@> wrote:
> > > >
> > > > Hi George: I'm not familiar with POPV - maybe it's a synonym for an
> > > > out-of-the-box status. If it's a synonym for APPR, then you will
need
> to
> > > > have rights to un-approve the PO, i.e. change the status back to
> WAPPR.
> > > > After that, you can change the work order number.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Shannon
> > > >
> > > >
> > > >
> > > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > > Of
> > > > George
> > > > Sent: February-08-12 3:31 PM
> > > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
<mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > > Subject: [MAXIMO List] PO Issue with workorder
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Hello everyone. How has everyone been?
> > > > I have a PO that has a status of 'POPV' (Purchase Order sent to
> Vendor).
> > > > The issue is that the workorder on the PO is no longer good because
> it
> > has
> > > a
> > > > status of 'CLOSE'. How can I remove the old workorder and and input
> the
> > > new
> > > > workorder that was created?
> > > > Hope someone can help me out.
> > > >
> > > > Maximo 6.2.1
> > > > SQL 2005
> > > > Weblogic
> > > >
> > > > thx,
> > > > mrggutz
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>
Hi,
Maximo 7 does show up a warning message while trying to close a Work Order having an Open Purchase Order on it, but would let the user to Close. Not sure if this is a Multisite setting.
Thanks,
Phanish
--- On Wed, 2/22/12, in2data <in2data@yahoo.com> wrote:
From: in2data <in2data@yahoo.com>
Subject: Re: [MAXIMO List] PO Issue with workorder
To: MAXIMO@yahoogroups.com
Date: Wednesday, February 22, 2012, 10:35 AM
Hi,
We never had version 6 installed but I think the issue is the work order is now closed and the system cannot make any changes to the work order. Removing the WO from the PO the system may need to adjust the planned materials.
You'll need to have someone change the work order directly in the database to historyflag = 0 and status APPR. Then you should be able to change the PO and go back and close the WO. It's relatively easy to do but as always you should test this before doing it in production.
You can close a WO even if there is an open PO for that work order. That's the reason we do not allow any user to close a WO. They can only COMP complete a work order. Six months after the COMP status the system closes the work order. That way we can get all of the receipts and adjustments from invoices done before the close.
Dave Bone
--- In MAXIMO@yahoogroups.com, phanish bharadwaj <phanish_bharadwaj@...> wrote:
>
> As far as I can remember, one cannot close a Work Order as long as it has an open PO associated with it. Am I missing something.
>
> --- On Thu, 2/9/12, ggutierrez@... <ggutierrez@...> wrote:
>
>
> From: ggutierrez@... <ggutierrez@...>
> Subject: Re: [MAXIMO List] PO Issue with workorder
> To: "MAXIMO" <MAXIMO@yahoogroups.com>
> Date: Thursday, February 9, 2012, 3:18 PM
>
>
>
> Â
>
>
>
> All the ones who implemented it are no longer with us. :(
>
> The sender of this message is responsible for its content and addressing. Any actions not conforming to Petrobras System internal policies are forbidden.
>
> ----- Original Message -----
> From: "Shannon Rotz" [shannonrotz@...]
> Sent: 02/09/2012 01:16 PM PST
> To: <MAXIMO@yahoogroups.com>
> Subject: RE: [MAXIMO List] PO Issue with workorder
>
> Who helped implement Maximo at your site? You must have had someone
> knowledgeable . or maybe it was a while ago?
>
> From: MAXIMO@yahoogroups.com [mailto:MAXIMO@yahoogroups.com] On Behalf Of
> George
> Sent: February-09-12 1:00 PM
> To: MAXIMO@yahoogroups.com
> Subject: Re: [MAXIMO List] PO Issue with workorder
>
> Only Maximo support I got is IBM.
>
> --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> Rotz" <shannonrotz@> wrote:
> >
> > Scratch that question - I re-read your original post.
> >
> >
> >
> > It should be default behaviour to be able to change the work order once
> the
> > PO has been un-approved. What happens if you go out of the PO screen, and
> > then go back to the PO screen and find the PO again? Is it writable then?
> >
> >
> >
> > If not, you may have some extra security added to that field, although
> > that's not as easy in 6.2.1 as it is in Maximo 7.
> >
> >
> >
> > Do you have a Maximo support person you can talk to?
> >
> >
> >
> >
> >
> >
> >
> > Shannon
> >
> >
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> Of
> > Shannon Rotz
> > Sent: February-09-12 12:30 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > Subject: RE: [MAXIMO List] PO Issue with workorder
> >
> >
> >
> >
> >
> > Is there a storeroom specified?
> >
> > Shannon
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > Of
> > George
> > Sent: February-09-12 12:12 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > Subject: Re: [MAXIMO List] PO Issue with workorder
> >
> > I changed the status of PO back to WAPPR and the workorder field is still
> > greyed out. What else can I try?
> >
> > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> > Rotz" <shannonrotz@> wrote:
> > >
> > > Hi George: I'm not familiar with POPV - maybe it's a synonym for an
> > > out-of-the-box status. If it's a synonym for APPR, then you will need to
> > > have rights to un-approve the PO, i.e. change the status back to WAPPR.
> > > After that, you can change the work order number.
> > >
> > >
> > >
> > >
> > >
> > > Shannon
> > >
> > >
> > >
> > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > Of
> > > George
> > > Sent: February-08-12 3:31 PM
> > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > Subject: [MAXIMO List] PO Issue with workorder
> > >
> > >
> > >
> > >
> > >
> > > Hello everyone. How has everyone been?
> > > I have a PO that has a status of 'POPV' (Purchase Order sent to Vendor).
> > > The issue is that the workorder on the PO is no longer good because it
> has
> > a
> > > status of 'CLOSE'. How can I remove the old workorder and and input the
> > new
> > > workorder that was created?
> > > Hope someone can help me out.
> > >
> > > Maximo 6.2.1
> > > SQL 2005
> > > Weblogic
> > >
> > > thx,
> > > mrggutz
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Hi,
We use
wonum in
(Select distinct wonum
from workorder
where historyflag = 0
and (status = 'COMP' or status = 'COMPCLOSE')
and (woclass = 'WORKORDER' or woclass = 'ACTIVITY') )
and then in the escalation the Escalation Point is CHANGEDATE time interval 180 days.
It does not check for open POs. We've never had an open PO 180 days after they complete a work order. The users have a query and report to show overdue POs and they follow up internally with the users that created and approved the PO to get those processed.
Works for us.
Dave
--- In MAXIMO@yahoogroups.com, "Shannon Rotz" <shannonrotz@...> wrote:
>
> I agree I use a similar setup with my clients, i.e. no one can close a
> work order, and no one can close a PO. I have escalations running to close
> both of them.
>
>
>
> The PO gets closed if a) the status is APPR; b) CHANGEDATE < {current date}
> xx days (usually 30 or 60); c) Receipts = `COMPLETE'; and d) all receipts
> have been invoiced.
>
>
>
> The Work order gets closed if a) status = `COMP'; b) CHANGEDATE < {current
> date} xx days (usually 60 or 90); and c) there are no open Pos referencing
> that work order.
>
>
>
> It works quite well, although a bit of training is usually needed on the
> topic of completing PO receipts. A lot of users don't realize that the
> "Complete Receipts" function exists, and tend to resist the whole thing
> until they are made aware of it.
>
>
>
> Just my $.02 worth
>
>
>
>
>
> Shannon
>
>
>
> From: MAXIMO@yahoogroups.com [mailto:MAXIMO@yahoogroups.com] On Behalf Of
> in2data
> Sent: February-22-12 8:36 AM
> To: MAXIMO@yahoogroups.com
> Subject: Re: [MAXIMO List] PO Issue with workorder
>
>
>
>
>
> Hi,
>
> We never had version 6 installed but I think the issue is the work order is
> now closed and the system cannot make any changes to the work order.
> Removing the WO from the PO the system may need to adjust the planned
> materials.
>
> You'll need to have someone change the work order directly in the database
> to historyflag = 0 and status APPR. Then you should be able to change the PO
> and go back and close the WO. It's relatively easy to do but as always you
> should test this before doing it in production.
>
> You can close a WO even if there is an open PO for that work order. That's
> the reason we do not allow any user to close a WO. They can only COMP
> complete a work order. Six months after the COMP status the system closes
> the work order. That way we can get all of the receipts and adjustments from
> invoices done before the close.
>
> Dave Bone
>
> --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> , phanish
> bharadwaj <phanish_bharadwaj@> wrote:
> >
> > As far as I can remember, one cannot close a Work Order as long as it has
> an open PO associated with it. Am I missing something.
> >
> > --- On Thu, 2/9/12, ggutierrez@ <ggutierrez@> wrote:
> >
> >
> > From: ggutierrez@ <ggutierrez@>
> > Subject: Re: [MAXIMO List] PO Issue with workorder
> > To: "MAXIMO" <MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> >
> > Date: Thursday, February 9, 2012, 3:18 PM
> >
> >
> >
> > Â
> >
> >
> >
> > All the ones who implemented it are no longer with us. :(
> >
> > The sender of this message is responsible for its content and addressing.
> Any actions not conforming to Petrobras System internal policies are
> forbidden.
> >
> > ----- Original Message -----
> > From: "Shannon Rotz" [shannonrotz@]
> > Sent: 02/09/2012 01:16 PM PST
> > To: <MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> >
> > Subject: RE: [MAXIMO List] PO Issue with workorder
> >
> > Who helped implement Maximo at your site? You must have had someone
> > knowledgeable . or maybe it was a while ago?
> >
> > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> Of
> > George
> > Sent: February-09-12 1:00 PM
> > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > Subject: Re: [MAXIMO List] PO Issue with workorder
> >
> > Only Maximo support I got is IBM.
> >
> > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> > Rotz" <shannonrotz@> wrote:
> > >
> > > Scratch that question - I re-read your original post.
> > >
> > >
> > >
> > > It should be default behaviour to be able to change the work order once
> > the
> > > PO has been un-approved. What happens if you go out of the PO screen,
> and
> > > then go back to the PO screen and find the PO again? Is it writable
> then?
> > >
> > >
> > >
> > > If not, you may have some extra security added to that field, although
> > > that's not as easy in 6.2.1 as it is in Maximo 7.
> > >
> > >
> > >
> > > Do you have a Maximo support person you can talk to?
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Shannon
> > >
> > >
> > >
> > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > Of
> > > Shannon Rotz
> > > Sent: February-09-12 12:30 PM
> > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > > Subject: RE: [MAXIMO List] PO Issue with workorder
> > >
> > >
> > >
> > >
> > >
> > > Is there a storeroom specified?
> > >
> > > Shannon
> > >
> > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > > Of
> > > George
> > > Sent: February-09-12 12:12 PM
> > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > Subject: Re: [MAXIMO List] PO Issue with workorder
> > >
> > > I changed the status of PO back to WAPPR and the workorder field is
> still
> > > greyed out. What else can I try?
> > >
> > > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> > > Rotz" <shannonrotz@> wrote:
> > > >
> > > > Hi George: I'm not familiar with POPV - maybe it's a synonym for an
> > > > out-of-the-box status. If it's a synonym for APPR, then you will need
> to
> > > > have rights to un-approve the PO, i.e. change the status back to
> WAPPR.
> > > > After that, you can change the work order number.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Shannon
> > > >
> > > >
> > > >
> > > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > > Of
> > > > George
> > > > Sent: February-08-12 3:31 PM
> > > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > > Subject: [MAXIMO List] PO Issue with workorder
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Hello everyone. How has everyone been?
> > > > I have a PO that has a status of 'POPV' (Purchase Order sent to
> Vendor).
> > > > The issue is that the workorder on the PO is no longer good because it
> > has
> > > a
> > > > status of 'CLOSE'. How can I remove the old workorder and and input
> the
> > > new
> > > > workorder that was created?
> > > > Hope someone can help me out.
> > > >
> > > > Maximo 6.2.1
> > > > SQL 2005
> > > > Weblogic
> > > >
> > > > thx,
> > > > mrggutz
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
Yes indeed you'll have to delete that record.
Since we stopped users from closing work orders several years ago I have not had to do this so I'd forgotten about that.
Dave
--- In MAXIMO@yahoogroups.com, "Shannon Rotz" <shannonrotz@...> wrote:
>
>
>
> I think Dave forgot one more database update:
>
>
>
>
>
> Delete from assethistory where wonum = {work order that was re-opened}
>
>
>
> Otherwise, if the work order is attached to an asset, you will have problems
> re-closing the work order.
>
>
>
>
>
>
>
> Shannon
>
>
>
> From: MAXIMO@yahoogroups.com [mailto:MAXIMO@yahoogroups.com] On Behalf Of
> George
> Sent: February-22-12 5:21 PM
> To: MAXIMO@yahoogroups.com
> Subject: [MAXIMO List] Re: PO Issue with workorder
>
>
>
>
>
>
> It worked Dave thanks for the help :)
>
> --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ,
> ggutierrez@ wrote:
> >
> > Thank you Dave I will give that a try.
> >
> >
> >
> >
> >
> > Thank You,
> >
> > George Gutierrez Jr.
> > Maximo Administration
> > Pasadena Refining Systems
> > 713.920.3908 Direct
> > 832.473.5330 Cell
> > U1O2 - Chave
> >
> >
> >
> > "in2data"
> > <in2data@>
> > Sent by: To
> > MAXIMO@ MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > om cc
> >
> > Subject
> > 02/22/2012 10:35 AM Re: [MAXIMO List] PO Issue with
> > workorder
> >
> > Please respond to
> > MAXIMO@
> > om
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Hi,
> >
> > We never had version 6 installed but I think the issue is the work order
> is
> > now closed and the system cannot make any changes to the work order.
> > Removing the WO from the PO the system may need to adjust the planned
> > materials.
> >
> > You'll need to have someone change the work order directly in the database
> > to historyflag = 0 and status APPR. Then you should be able to change the
> > PO and go back and close the WO. It's relatively easy to do but as always
> > you should test this before doing it in production.
> >
> > You can close a WO even if there is an open PO for that work order. That's
> > the reason we do not allow any user to close a WO. They can only COMP
> > complete a work order. Six months after the COMP status the system closes
> > the work order. That way we can get all of the receipts and adjustments
> > from invoices done before the close.
> >
> > Dave Bone
> >
> > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> , phanish
> bharadwaj <phanish_bharadwaj@>
> > wrote:
> > >
> > > As far as I can remember, one cannot close a Work Order as long as it
> has
> > an open PO associated with it. Am I missing something.
> > >
> > > --- On Thu, 2/9/12, ggutierrez@ <ggutierrez@> wrote:
> > >
> > >
> > > From: ggutierrez@ <ggutierrez@>
> > > Subject: Re: [MAXIMO List] PO Issue with workorder
> > > To: "MAXIMO" <MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> >
> > > Date: Thursday, February 9, 2012, 3:18 PM
> > >
> > >
> > >
> > > Ã
> > >
> > >
> > >
> > > All the ones who implemented it are no longer with us. :(
> > >
> > > The sender of this message is responsible for its content and
> addressing.
> > Any actions not conforming to Petrobras System internal policies are
> > forbidden.
> > >
> > > ----- Original Message -----
> > > From: "Shannon Rotz" [shannonrotz@]
> > > Sent: 02/09/2012 01:16 PM PST
> > > To: <MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> >
> > > Subject: RE: [MAXIMO List] PO Issue with workorder
> > >
> > > Who helped implement Maximo at your site? You must have had someone
> > > knowledgeable . or maybe it was a while ago?
> > >
> > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> Of
> > > George
> > > Sent: February-09-12 1:00 PM
> > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> > > Subject: Re: [MAXIMO List] PO Issue with workorder
> > >
> > > Only Maximo support I got is IBM.
> > >
> > > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> ,
> > "Shannon
> > > Rotz" <shannonrotz@> wrote:
> > > >
> > > > Scratch that question - I re-read your original post.
> > > >
> > > >
> > > >
> > > > It should be default behaviour to be able to change the work order
> once
> > > the
> > > > PO has been un-approved. What happens if you go out of the PO screen,
> > and
> > > > then go back to the PO screen and find the PO again? Is it writable
> > then?
> > > >
> > > >
> > > >
> > > > If not, you may have some extra security added to that field, although
> > > > that's not as easy in 6.2.1 as it is in Maximo 7.
> > > >
> > > >
> > > >
> > > > Do you have a Maximo support person you can talk to?
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Shannon
> > > >
> > > >
> > > >
> > > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com> ] On
> > Behalf
> > > Of
> > > > Shannon Rotz
> > > > Sent: February-09-12 12:30 PM
> > > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > > > Subject: RE: [MAXIMO List] PO Issue with workorder
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Is there a storeroom specified?
> > > >
> > > > Shannon
> > > >
> > > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > > > Of
> > > > George
> > > > Sent: February-09-12 12:12 PM
> > > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > > Subject: Re: [MAXIMO List] PO Issue with workorder
> > > >
> > > > I changed the status of PO back to WAPPR and the workorder field is
> > still
> > > > greyed out. What else can I try?
> > > >
> > > > --- In MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > > <mailto:MAXIMO%40yahoogroups.com> , "Shannon
> > > > Rotz" <shannonrotz@> wrote:
> > > > >
> > > > > Hi George: I'm not familiar with POPV - maybe it's a synonym for an
> > > > > out-of-the-box status. If it's a synonym for APPR, then you will
> need
> > to
> > > > > have rights to un-approve the PO, i.e. change the status back to
> > WAPPR.
> > > > > After that, you can change the work order number.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Shannon
> > > > >
> > > > >
> > > > >
> > > > > From: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > > <mailto:MAXIMO%40yahoogroups.com>
> > > > [mailto:MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > > <mailto:MAXIMO%40yahoogroups.com> ] On Behalf
> > > > Of
> > > > > George
> > > > > Sent: February-08-12 3:31 PM
> > > > > To: MAXIMO@yahoogroups.com <mailto:MAXIMO%40yahoogroups.com>
> <mailto:MAXIMO%40yahoogroups.com>
> > > <mailto:MAXIMO%40yahoogroups.com>
> > > > <mailto:MAXIMO%40yahoogroups.com>
> > > > > Subject: [MAXIMO List] PO Issue with workorder
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Hello everyone. How has everyone been?
> > > > > I have a PO that has a status of 'POPV' (Purchase Order sent to
> > Vendor).
> > > > > The issue is that the workorder on the PO is no longer good because
> > it
> > > has
> > > > a
> > > > > status of 'CLOSE'. How can I remove the old workorder and and input
> > the
> > > > new
> > > > > workorder that was created?
> > > > > Hope someone can help me out.
> > > > >
> > > > > Maximo 6.2.1
> > > > > SQL 2005
> > > > > Weblogic
> > > > >
> > > > > thx,
> > > > > mrggutz
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>