psdi.app.inventory

Class Inventory

java.lang.Object

psdi.mbo.Mbo

psdi.mbo.StatefulMbo

psdi.app.inventory.Inventory

All Implemented Interfaces:

java.rmi.Remote, InventoryRemote, MboConstants, MboRemote, StatefulMboRemote, MaxRemoteProxy

Direct Known Subclasses:

ToolInv

public class Inventory
extends StatefulMbo
implements InventoryRemote

Mbo object to represent Inventory.

See Inventory Package description.

This is a site level object.

The key attributes in this object are as follows: SiteId, Itemnum, Location

The attributes in this object are as follows:

Attribute Name	Description
ABCType	ABC Analysis Type. Used to categorize items based on a ranking of the organization's monetary investment in each item. The category to which an inventory item belongs is determined by multiplying the current YTD issued quantity by the last cost of the item and sorting the results in descending order. Validated against the ValueList table where value list name is ABCTYPE. Valid values are A, B, C or N. These values represent the percentile buckets into which the results of the above calculation and sort are categorized and are set in the MAXVARS table. An example breakdown would be: ABC Type Percentile Range Description MAXVARS.VARNAME MAXVARS.VARVALUE Type A 71 to 100 percent highest monetary investment A_BREAKPOINT 0.3 Type B 41 to 70 percent mid-range monetary investment B_BREAKPOINT 0.3 Type C 0 to 40 percent lowest monetary investment C_BREAKPOINT 0.4 An ABCType of N excludes this inventory item from the ABC analysis. ABCType is related to Cycle Count Frequency (CCF). CCF is set in the MAXVARS table for each ABC type. An example of cycle count frequency settings is: ABC Type Cycle Count Frequency (in days) MAXVARS.VARNAME MAXVARS.VARVALUE Type A 30 A_CCF 30 Type B 60 B_CCF 60 Type C 90 C_CCF 90 The ABCType helps to ensure that crucial inventory does not fall below minimum levels and that the current balance is reconciled with the actual count. This latter function is done via the CCF.
AddToStoreloc	Non-persistent attribute used as editable location for the action page of "Add Items to Store" on the Item Application.
Avgcost	Inventory Average Cost. Initially set to the standard cost (Stdcost) when the inventory item is added. After that, the average cost can be manually adjusted. It is also automatically updated when the item is received into the storeroom. The algorithm for updating the average cost is as follows: (previous current balance * average cost) + (quantity received * receiving cost) / new current balance The average cost is also updated when receipts are created for this inventory item due to invoice cost variances or the proration of standard services upon invoice approval.
AvblBalance	Non-persistent attribute used to hold the total available balance for a particular inventory record. It is calculated as: available balance = curBalTotal- ExpiredQty - ReservedQty Please refer to the non-persistent columns curBalTotal, ExpiredQty, and ReservedQty for more information.
Binnum	Number of the default bin where the item is issued or received if no bin information is specified.
Catalogcode	Identification code for this item in the primary vendor's catalog.
Category	Item category. Validated against the ValueList table where value list name is CATEGORY.Valid values are: Category Description STK Stocked Items. Have a regular turnover rate and are automatically reordered depending on the setup criteria when the Reorder routine is run. NS Non-stocked Items. Do not have a regular turnover rate and are not automatically reordered when the Reorder routine is run. SP Special Order Items. Have a one-time purpose and can be deleted without much restriction.
CCF	Cycle Count Frequency. Used to indicate how often this inventory item is physically counted and to help ensure that the current balance is reconciled with the actual count. The CCF can be set based on this item's ABCType.
Controlacc	Inventory Control Account. Used to track the material issues and receipts for the inventory item. This account is debited upon receipt and credited upon issue of this item. This value defaults to the Locations.ControlAcc for the storeroom but can be modified. Refer to InvTrans.TransType for other uses of Controlacc.
CurBalTotal	Non-persistent attribute to hold the sum of all the InvBalances.curbal for a given inventory record.
Deliverytime	Expected delivery time for the order (in days). This is the average time span between reorder and receipt of the item. Also known as lead time, delivery time is recalculated upon each receipt of this inventory item. The weighting of the most recent receipt in lead time calculation for the inventory item can be increased or descreased versus the average for past receipts of the item. Lead time calculation weights are specified by storeroom.
ExpiredQty	Non-persistent attribute to hold the sum of the current balance of all lots which have expired for a given inventory record. For a non lot-tracking item, the value is always 0.
Glaccount	General Ledger Account. Used to track expenses for a given inventory record.
InvCostAdjacc	Inventory Cost Adjustment Account, Used to track changes in inventory standard, average or capital cost adjustments. This value defaults to the Locations.InvCostAdjAcc for the storeroom but can be modified. Refer to InvTrans.TransType for details regarding the use of Invcostadjacc.
Issue1yrago	Total number of items issued from this storeroom location one year ago
Issue2yrago	Total number of items issued from this storeroom location two years ago
Issue3yrago	Total number of items issued from this storeroom location three years ago
Issueunit	Description of how the item is requisitioned from inventory, for example, individually, by the box, by the dozen, by roll or by feet. This value can be selected from the ORDERUNIT table or entered free-form.
Issueytd	Total number of items issued from this storeroom location for the year-to-date
Itemnum	Inventory Item Number.
ItemSetID	Identifier of the itemset identifier for this object.
Lastcost	Inventory Last Cost. Initially set to the standard cost (Stdcost) when the inventory item is added. After that, it is automatically updated to the cost of the item upon every receipt, including receipts created due to invoice cost variances upon invoice approval.
Lastissuedate	Last date the item was issued from this inventory's storeroom location
Ldkey	Long Description Key. This is a link to text stored in the LongDescription table.
Location	This inventory item's storeroom location.
LotNum	Non-persistent attribute used to maintain InvBalances.LotNum through the Inventory object. For lot-tracking items only. See the LotNum attribute defined in InvLot for more information.
Manufacturer	Identification code for this inventorys primary manufacturer. Manufacturer need not exist in Companies table. However, the manufacturer can be selected from the Companies table.
Maxlevel	Theoretical maximum quantity for this inventory item at this location. This attribute is for informational purposes only as there is no functionality connected with it.
Minlevel	Reorder point. Minlevel is the target balance (in issue units) to have on hand. When the current balance is at or below this level, this item in the storeroom location can be reordered without ignoring the reorder point.
Modelnum	Primary vendor's or primary manufacturer's identification number for this item object
Orderqty	Optimum reorder quantity (in order units) to best balance the costs of procuring this inventory item with the costs of carrying it in inventory.
Orderunit	Description of how the item is ordered, for example, individually, by the box, by the dozen, by roll or by feet. This value can be selected from the OrderUnit table or entered free-form.
Orgid	Identifier of the organization for this inventory.
ReservedQty	Nnon-persistent attribute to hold the sum of reserved quantity stored in InvReserve.ReservedQty for this Inventory record's Itemnum and Location.
Shrinkageacc	Inventory Shrinkage Account. Used to track physical count or current balance adjustment transactions. This value defaults to the Locations.ShrinkageAcc for the storeroom but can be modified. Refer to InvTrans.TransType for details regarding the use of Shrinkageacc.
Siteid	Identifier of the site for this inventory.
Sstock	Safety stock, or the minimum amount of stock to be kept on hand at all times. This is the minimum amount that should be on hand when the reordered stock arrives.
Stdcost	User-specified cost that does not get automatically updated. As a result, this inventory item can be carried at a cost that is independent of differences among receipt costs for this item (as with Avgcost and Lastcost) and that will not be impacted by invoice variances standard service prorations (as with Avgcost).
Vendor	Identification code for this inventory's primary vendor. Vendor must exist in the Companies table.

Field Summary

Fields

Modifier and Type	Field and Description
boolean	doneRemoveExtra
boolean	isKitComponentToAddToStore

Fields inherited from class psdi.mbo.StatefulMbo

onListTab, statusChangeButtonSigoption, targetStatusOption

Fields inherited from class psdi.mbo.Mbo

MULTILANGCOPY, phantomList, phantomQueue

Fields inherited from interface psdi.mbo.MboConstants

ALLROWS, CHANGEDBY_USER, COUNT_ADDITIONS, COUNT_AFTERSAVE, COUNT_DATABASE, COUNT_DELETED, COUNT_EXISTING, DBCONFIG, DELAYVALIDATION, DELAYVALIDATIONONLY, DISCARDABLE, GOTCOMPLETEWHERE, HIDDEN, NO_RELATEDMBOS_OF_OWNERSCHILDREN_FETCH, NOACCESSCHECK, NOACTION, NOADD, NOCOMMIT, NODELETE, NONE, NOOVERWRITE, NOSAVE, NOSETVALUE, NOUPDATE, NOVALIDATION, NOVALIDATION_AND_NOACTION, NOVALIDATION_AND_NOACTION_ALLOWCROSSOVER, READONLY, REBUILD, REQUIRED, SAMEVALUEVALIDATION, SETBYPARENT, USER

Constructor Summary

Constructors

Constructor and Description
Inventory(MboSet ms) Constructor for the Inventory Object

Method Summary

Methods

Modifier and Type	Method and Description
void	add() add() Provides defaults for a new Inventory Record.
InvBalancesRemote	addInvBalancesRecord(java.lang.String binnum, java.lang.String lotnum, double curbal) addInvBalancesRecord(1,2,3) Adds an InvBalance record, setting the values to those passed in for bin,lot, and quantity Also, defaults the physcnt attribute to the same as curbal - the passed in quantity
InvBalancesRemote	addInvBalancesRecord(java.lang.String binnum, java.lang.String lotnum, double curbal, java.lang.String conditionCode) addInvBalancesRecord(1,2,3,4) Adds an InvBalance record, setting the values to those passed in for bin,lot, and quantity Also, defaults the physcnt attribute to the same as curbal - the passed in quantity
MboRemote	addInvLifoFifoCostRecord(double quantity, double unitcost, java.lang.String conditioncode, java.lang.String getName, long matrectransid) This method is used by Transfer and Receipt objects to insert the invlifofifoCost record.
MboRemote	addInvLifoFifoCostRecord(java.lang.String conditioncode) Add an invlifofifocost record.
java.util.Date	addMonths(int addMonths, java.util.Date fromDate) Calculates a date a number of months from the given date.
void	addUpdateInvVendor() Add a new InvVendor record if the combination of itemnum/vendor/manufacturer/modelnum does not exist in the Invvendor table.
java.util.Date	addYears(int addYears, java.util.Date fromDate) Calculates a date a number of years from the given date.
MboRemote	adjustAverageCost(double newcost, java.lang.String conditionCode) adjustAverageCost(1,2) Adjust Inventory Average Cost (AVGCSTADJ) This method is used to carry out an average cost adjustment (not updating as in receipts/ returns).
MboRemote	adjustCurrentBalance(java.lang.String binnum, java.lang.String lotnum, double newBalance, java.lang.String conditionCode) adjustCurrentBalance(1,2,3,4) Performs a current balance adjustment on the InvBalances record as identified by lotnum, binnum, and conditionCode
MboRemote	adjustPhysicalCount(java.lang.String binnum, java.lang.String lotnum, double quantity, java.util.Date pCountDate)
MboRemote	adjustPhysicalCount(java.lang.String binnum, java.lang.String lotnum, double quantity, java.util.Date pCountDate, java.lang.String ownersysid) adjustPhysicalCount(1,2,3,4,5) Performs a physical count adjustment on the InvBalances record as identified by lotnum and binnum.
MboRemote	adjustPhysicalCount(java.lang.String binnum, java.lang.String lotnum, double quantity, java.util.Date pCountDate, java.lang.String ownersysid, java.lang.String conditionCode) adjustPhysicalCount(1,2,3,4,5,6) Performs a physical count adjustment on the InvBalances record as identified by lotnum and binnum.
MboRemote	adjustStandardCost(double newcost, java.lang.String conditionCode) adjustStandardCost(1,2) Adjust Inventory Standard Cost (STDCSTADJ) This method is used to carry out a standard cost adjustment.
void	appValidate() last minute validate before save().
double	calculateAvailableQty() Method to calculate available quantity Calculates available quantity by subtracting reserved qty and expired qty from current balance for a itemnum and location
double	calculateCurrentBalance() Method to calculate current balance Calculates sum of current balances in invbalances for a itemnum and location
double	calculateHardShippedQty() Method to calculate hard reserved shipped quantity. Calculates sum of shipped quantity in invreserve that are hard reservations for a itemnum and location
double	calculateReceivedQty()
double	calculateRQtyNotStaged() Method to calculate reserved quantity without Staged quantity. Calculates sum of reserved quantity in invreserve for a itemnum and location
double	calculateShippedQty() Method to calculate shipped quantity. Calculates sum of shipped quantity less the already-received quantity for an itemnum and location
double	calculateStagedQty() Method to calculate staged quantity. Calculates sum of staged quantity in invreserve for a itemnum and location
void	canAdjustAvgCost() Determines if the item is capitalized.
void	canAdjustBalance() Determines if the item is rotating.
void	canAdjustStdCost() Determines if the item is capitalized.
void	canDelete() Inventory.canDelete()- Checks to see if this object can be deleted if it is on a jobplan, throw exception if it is on a reservation, throw exception if this is on an open WO, throw exception if this is on an open MR, throw exception if this is on an open PR, throw exception if this is on an open PO, throw exception if this is on any invbalance record with balance > 0, throw exception
void	canDoAction() Can we perform inventory adjustments?
void	canIssueCurrentItem() can this inventory item be used issued to Asset?
void	canKit() can this inventory item be used for kitting?
void	canReconcileBalances() Determines if all of the invBalances for this Inventory record have been reconciled.
void	canTransferCurrentItem() Determines if the item is rotating before trying to transfer.
void	changeCapitalizedStatus(boolean capitalized) Deprecated. Replaced by changeCapitalizedStatus(boolean capitalized, String capitalacc, String memo)
void	changeCapitalizedStatus(boolean capitalized, java.lang.String capitalacc, java.lang.String memo) sets cost & gl accout values upon changing the capitalized flag on Item.
void	changeStatus(java.lang.String status, java.util.Date date, java.lang.String memo, long accessModifier) This method is overridden to add a wrapper to exceptions thrown during change status and to write warnings whether or not the status change is successful
void	changeStockCategory(java.lang.String newcat) changeStockCategory(1) This method changes the Inventory.CATEGORY of an item in a storeroom to the value passed in.
boolean	checkAssetExists() This method checks if the item exist in Asset.
void	checkBalandPOPR() This methods checks if the balance exists and PO/PR exists.
boolean	checkCIExists() This method checks if the item exist in CI.
void	checkComponentCostType(MboSetRemote itemStructKitSet) Checks if the kit components have cost type Lifo or Fifo.
boolean	checkContractExists() This method checks if the item exist in ContractLine for Contract that are in a status other than CAN or CLOSE.
boolean	checkInvBalancesExists() This method checks if the item exist in InvBalances.
boolean	checkInvUseStatusForPlanning() This method checks if the item exist in Inventory Usage Lines in with status STAGED or SHIPPED.
boolean	checkInvUseStatusForPndObs() This method checks if the item exist in Inventory Usage Lines in with status ENTERED, STAGED or SHIPPED.
boolean	checkJPExists() This method checks if the item exist in JobItem for job plans that are in a status other than INACTIVE.
boolean	checkMRExists() This method checks if the item exist in MRLine for MR that are in a status other than CAN or CLOSE
boolean	checkPOExists() This method checks if the item exist in POLine for PO that are in a status other than CAN or CLOSE.
boolean	checkPRExists() This method checks if the item exist in PRLine for PR that are in a status other than CAN or COMP.
boolean	checkReconcileFlag() This method checks invbalances reconciled flag for this inventory.
void	checkRequestAgainstItemMaxIssue(java.lang.String assetnum, double qtyRequested) checks to make sure that the sum of the quantity being issued to an asset or work order and the sum of the total issued quantity (ISSUEDQTY in the SPAREPART table for the given item and asset combination) is less than or equal to the maximum permissible quantity (MAXISSUE in ITEM table)
boolean	checkWOExists() This method checks if the item exist in WPItem for work orders that are in a status other than COMP or CLOSE
void	consumeInvLifoFifoCostRecord(double quantity, java.lang.String conditionCode) This method is used by Transfer and Receipt objects to consume the invlifofifoCost record.
void	consumeInvLifoFifoCostRecord(double quantity, java.lang.String conditionCode, long transid) This method is used by Transfer and Receipt objects to consume the invlifofifoCost record.
void	consumeInvLifoFifoCostRecordRemaining(double quantity, java.lang.String conditionCode, long transid) This method is used by Transfer and Receipt objects to consume the invlifofifoCost record.
void	copyAssetsForIssue(MboSetRemote assetSet, MboRemote issueItemToAssetMbo) Used by "Issue Item to Multiple Assets" to copy a set of assets to IssueCurrentItemMbos.
MboRemote	createIssue() createIssue() This remote inventory method was created to provide callers the ability to issue this inventory record without passing any parameters whatsoever.
void	delete(long access) delete(1) If we delete Inventory, then delete all InvBalance records associated with this Inventory.
MboRemote	doAdjustment(NonPersistentMboRemote invAdj) Calls "Adjust Current Balance", "Adjust Physical Count","Reconcile Current Balance", "Adjust Standard Cost", or "Adjust Average Cost" depending on the information gathered in the NonPersistentMbo passed.
double	getAccumulativeTotalCurBal() 11-14180: return the accumulativeTotalCurbal to MatRecTrans
boolean	getAutoCreateInvLifoFifoCost() Returns autoCreateInvLifoFifoCost flag.
double	getAverageCost(MboSetRemote invLifoFifoCostSet) This method averages the cost for the display on UI.
java.lang.String	getCostType() Returns Item's Cost Type.
double	getCurrentBalance(java.lang.String binnum, java.lang.String lotnum) getCurrentBalance(1,2) Returns the current balance for this item/location combination, assuming conditionCode is null
double	getCurrentBalance(java.lang.String binnum, java.lang.String lotnum, java.lang.String conditionCode) getCurrentBalance(1,2,3) Returns the current balance for this item/location combination if binnum/lotnum/conditionCode passed into this method as null, they will NOT be considered when retrieving balance set! if binnum/lotnum/ConditionCode passed into this method as "", they will be treated as a null (eg.
double	getDefaultAverageCost() getDefaultAverageCost() Returns the default average cost (inventory.avgcost)
double	getDefaultIssueCost() getDefaultIssueCost() Returns the default issue cost of the inventory's 100% condition rate.
double	getDefaultIssueCost(java.util.ArrayList<InvLifoFifoCost> invLifoFifoCostList) This method return the most recent costdate's unit cost if the cost type is LIFO, Otherwise returns least recent costdate's unit cost if the cost type s FIFO.
double	getDefaultIssueCost(AssetRemote assetRemote) getDefaultIssueCost(1) If user has chosen to call this method (by passing in an AssetRemote, they user has chosen to get the proper issue cost for item which is rotating asset.
double	getDefaultIssueCost(AssetRemote assetRemote, java.lang.String conditionCode) getDefaultIssueCost(1,2) If user has chosen to call this method (by passing in an AssetRemote, they user has chosen to get the proper issue cost for item which is rotating asset.
double	getDefaultIssueCost(java.lang.String conditionCode) getDefaultIssueCost(1) Returns the default issue cost of the inventory for the specified condition code.
MXApplicationException	getErrorMsg() Returns the error message, if any, for this inventory object.
InvBalances	getInvBalanceRecord(java.lang.String binnum, java.lang.String lotnum, java.lang.String conditionCode) getInvBalanceRecord(1,2,3) - PACKAGE access Seeks out a InvBalance mbo based on passed in values for bin and lot
InvBalances	getInvBalanceRecord(java.lang.String binnum, java.lang.String lotnum, java.lang.String conditionCode, java.lang.String storeLoc, java.lang.String storeSite) getInvBalanceRecord(1,2,3,4) - PACKAGE access Seeks out a InvBalance mbo based on passed in values for bin and lot
MboSetRemote	getInvBalancesSetForKitComponent(java.lang.String binnum) returns the set of InvBalances across all bins to satisfy the amount needed to assemble a kit.
MboRemote	getInvCostRecord(java.lang.String conditionCode) returns InvCost mbo based on the conditionCode passed
java.lang.String	getInventoryStatus() Returns the inventory status.
java.lang.String	getInvGenType() This Method returns the Invoice generation type.
MboRemote	getInvLifoFifoCostRecord(java.lang.String conditionCode) Returns the most recent cost date InvLifoFifoCost mbo based on the conditionCode passed
MboSetRemote	getInvLifoFifoCostRecordSet(java.lang.String conditionCode) returns InvFifoCost mbo based on the conditionCode passed
MboSetRemote	getInvLifoFifoCostRecordSet(java.lang.String conditionCode, long transid) returns InvFifoCost mbo based on the conditionCode passed
MboSetRemote	getInvLifoFifoCostRecordSetSorted(java.lang.String conditionCode) returns InvFifoCost mbo based on the conditionCode passed
java.lang.String	getKitAction() set when menu action is chosen to Assemble Kit or Disassemble Kit
java.util.Date	getNextDate() Calculates the next value for the NextDate attribute, based on the PM's day frequency.
double	getPhysicalCount(java.lang.String binnum, java.lang.String lotnum) getPhysicalCount(1,2) Returns the physical count for this item/location combination if binnum/lotnum passed into this method as null, they will NOT be considered when retrieving balance set! if binnum/lotnum passed into this method as "", they will be treated as a null (eg.
double	getPhysicalCount(java.lang.String binnum, java.lang.String lotnum, java.lang.String conditionCode) getPhysicalCount(1,2) Returns the physical count for this item/location combination if binnum/lotnum passed into this method as null, they will NOT be considered when retrieving balance set! if binnum/lotnum passed into this method as "", they will be treated as a null (eg.
MboRemote	getPrimaryInvVendor(MboSetRemote invVendSet) returns the primary InvVendor record if found from the passed InvVendor set.
java.lang.String	getProcess() Gets the work flow process for item.
java.lang.String	getStatus() Returns status at inventory level.
java.lang.String	getStatusListName() Gets the name of the value list that contains all the status's.
boolean	getStatusSetByMaxvarFlag() This flag return true if the status is set by the maxvar.
void	increaseAccumulativeTotalCurBal(double currentReceiptQty) 11-14180:increasing the running receipts for the update of MatRecTrans.totalcurbal
void	init() init() Initialization rountine.
void	initFieldFlagsOnMbo(java.lang.String attrName) The logic of setting the readonly and required field flags to the mbo.
void	invUpdateCostType() This method updates the cost type of the inventory record.
boolean	isCapitalized() Is the inventory item a capitalized item?
boolean	isConsignment() This method returns the consignment flag for the inventory record.
boolean	isKit() Is the inventory item a kit?
boolean	isNonStocked() isNonStocked() Returns true if the ITEMORGINFO "CATEGORY" has a maxvalue of "NS" else returns false
boolean	isObsolete() Returns true if this item was Obsolete.
boolean	isPendobs() Returns true if this item was pending obsolence.
boolean	isPlanning() Returns true if this item was Obsolete.
boolean	isSpecialOrder() isSpecialOrder() Returns true if the ITEMORGINFO "CATEGORY" has a maxvalue of "NS" else returns false
boolean	isStocked() isStocked() Returns true if the ITEMORGINFO "CATEGORY" has a maxvalue of "STK" else returns false
void	kitMakeOrBreak(KitRemote kit) manage kit balances
boolean	pendingTransactionExists(MboSetRemote transSet) This method checks if there are any transactions with invoices that are not approved or paid.
boolean	POPRExists() This method checks if any PO/PR exists for this inventory that are cancelled or closed status.
void	reconcileBalances() reconcileBalances() This Reconciling Balances method is done at the storeroom level.
MboRemote	reconcileBalances(java.lang.String binnum, java.lang.String lotnum) reconcileBalances(1,2) This Reconciling Balances method is done at the storeroom/binnum/lotnum level.
void	reconcileBalances(java.lang.String controlacc, java.lang.String shrinkageacc, java.lang.String remark) reconcileBalances(1,2,3) This Reconciling Balances method is done at the storeroom level.
void	refreshCountDate() set the adjustedphscntdate in the invbalances when the inventory.physcntdate is changed
void	save() Save()- Default save functionality.
void	setAutoCreateInvBalances(boolean flag) Should an InvBalances be automatically created if the object is new?
void	setAutoCreateInvCost(boolean flag) Should an InvCost be automatically created if the object is new?
void	setAutoCreateInvLifoFifoCost(boolean flag) Should an InvLifoFifoCost be automatically created if the object is new?
void	setCostType() This method sets the cost type for the new inventory record.
void	setEditabilityFlags() This methid is called from View/Edit Consignment details bean to set READONLY flags.
void	setIsKitComponentToAddToStore(boolean isKitComponentToAddToStore)
void	setKitAction(java.lang.String makeOrBreak) called when menu action is chosen to Assemble Kit or Disassemble Kit
void	setNextInvoiceDate() Updates the INVENTORY.NEXTINVOICEDATE when necessary.
MboSetRemote	siteReceiptsAndTransfers() returns set of MatRecTrans associated with this Inventory's itemnum/location combination and the Login user's SiteId.
void	updateConsignment() This method checks if the consignment flag can be updated.
MboRemote	updateCurrentBalance(java.lang.String binnum, java.lang.String lotnum, java.lang.String conditionCode, double toIncrement) updateCurrentBalance(1,2,3,4) Increment the curbal by the double passed on the InvBalances record as identified by lotnum and binnum.
void	updateInventoryAverageCost(double quantity, double totalvalue) updateInventoryAverageCost(1,2) This method is provided to update the average cost of the item for the specified storeroom.
void	updateInventoryAverageCost(double quantity, double totalvalue, double exr) This method is provided to update the average cost of the item for the specified storeroom.
void	updateInventoryAverageCost(double quantity, double totalvalue, double exr, InvCost invCost)
void	updateInventoryAverageCost(double quantity, double totalvalue, double exr, java.lang.String conditionCode) This method is provided to update the average cost of the item for the specified storeroom.
void	updateInventoryDeliveryTime(double deliveryTime) updateInventoryDeliveryTime(1) This method updates inventory.delivertime with the value passed in
void	updateInventoryIssueDetails(java.util.Date issDate, double quantity) updateInventoryIssueDetails(1,2) This method updates the inventory record for the item-storeroom with details about the last issue date and issue YTD.
void	updateInventoryLastCost(double unitcost) updateInventoryLastCost(1) This method updates the inventory record with details about the last cost at which the item was PURCHASED.
void	updateInventoryLastCost(double unitcost, double exr) updateInventoryLastCost(1,2) This method updates the inventory record with details about the last cost at which the item was PURCHASED.
void	updateInventoryLastCost(double unitcost, double exr, InvCost invcost) updateInventoryLastCost(1,2) This method updates the inventory record with details about the last cost at which the item was PURCHASED.
void	validateChangeStatus(java.lang.String status, java.util.Date date, java.lang.String memo) This method validates if the status change is allowed.
void	zeroYTDQuantities() zeroYTDQuantities() This method zeros the year to date quantity and moves the issue1yr/2yr/3yr back a year each respectively.

Methods inherited from class psdi.mbo.StatefulMbo

canChangeMaxStatus, canChangeStatus, canChangeStatus, canChangeStatus, canDeleteAttachedDocs, changeMaxStatus, changeMaxStatus, changeStatus, changeStatus, checkForOpenStatus, checkStatusChangeAuthorization, fireEvent, getInternalStatus, getOnListTab, getOverridePVStatusException, getStatusChangeButtonSigoption, getStatusList, getTargetStatusOption, getValidStatusList, setOnListTab, setOverridePVStatusException, setStatusChangeButtonSigoption, setTargetStatusOption

Methods inherited from class psdi.mbo.Mbo

addMboSetForRequiredCheck, addToDeleteForInsertList, andEvaluateConditions, blindCopy, checkFieldAccess, checkMethodAccess, checkMethodAccess, checkQualifiedRestriction, checkSiteOrgAccessForSave, clear, copy, copy, copy, copyFake, copyValue, copyValue, createComm, delete, determineRequiredFieldsFromERM, duplicate, enableMethod, evaluateCondition, evaluateCondition, evaluateCtrlConditions, evaluateCtrlConditions, evaluateRestriction, excludeObjectForPropagate, findAllNullRequiredFields, generateAutoKey, generateContentUID, getAlwaysFlags, getAttrRestrictionFlag, getAttrRestrictions, getBoolean, getByte, getBytes, getCheckpoint, getClientLocale, getClientTimeZone, getCommLogOwnerNameAndUniqueId, getCondition, getDatabaseValue, getDate, getDeleteForInsertList, getDocLinksCount, getDomainFilterWhere, getDomainIDs, getDouble, getExistingMboSet, getFetchIndex, getFieldExceptions, getFlags, getFloat, getIgnoreLockCheck, getInitialValue, getInsertCompanySetId, getInsertItemSetId, getInsertOrganization, getInsertSite, getInstanciatedMboSet, getInstanciatedMboValue, getInt, getIntegrationService, getKeyValue, getLanguageRecordRowStamp, getLinesRelationship, getList, getLockedByDisplayName, getLockedByUserID, getLong, getMatchingAttr, getMatchingAttr, getMatchingAttrs, getMaxMessage, getMboData, getMboDataSet, getMboForAttribute, getMboForAttributeStatic, getMboInitialValue, getMboList, getMboLogger, getMboRecordData, getMboServer, getMboSet, getMboSet, getMboSet, getMboSetInfo, getMboValue, getMboValueData, getMboValueData, getMboValueData, getMboValueInfoStatic, getMboValueInfoStatic, getMessage, getMessage, getMessage, getMessage, getMXTransaction, getName, getOrgForGL, getOrgSiteForMaxvar, getOwner, getProfile, getPropagateKeyFlag, getProxy, getRecordIdentifer, getRecordMboName, getRelatedWhere, getRelatedWhere, getRelationshipNameToLangTable, getRowRestrictionFlag, getRowStamp, getSecurityLogger, getSiteOrg, getSqlLogger, getString, getString, getStringInBaseLanguage, getStringInSpecificLocale, getStringTransparent, getSynonymValueWhere, getTenantId, getThisMboSet, getTranslator, getUniqueIdentifer, getUniqueIDName, getUniqueIDValue, getUserInfo, getUserName, getValidateOrder, hasFieldAccess, hasHierarchyLink, hasLockSaveRights, hasRelatedQbe, hasUniqueID, initRelationship, isAutoKeyed, isBasedOn, isChangeByUserWhenSetFromLookup, isEAuditFieldModified, isESigFieldModified, isFlagSet, isForDM, isLocked, isLocked, isLockedByMe, isMasterTenant, isMboLockedByMe, isModified, isModified, isNew, isNull, isOptionGranted, isSelected, isSkipCopyField, isValid, isZombie, lock, modify, moveFieldFlagsToMboValue, needCallInitFieldFlag, orEvaluateConditions, propagateKeyValue, removeRelatedSet, rollbackToCheckpoint, select, setAppDefaultValue, setApplicationError, setApplicationRequired, setAutokeyFields, setCopyDefaults, setDefaultValue, setDefaultValues, setDeleted, setEAuditFieldModified, setESigFieldModified, setFetchIndex, setFieldFlag, setFieldFlag, setFieldFlag, setFieldFlag, setFieldFlag, setFieldFlag, setFieldFlags, setFlag, setFlag, setFlags, setForDM, setHierarchyLink, setIgnoreRecordLockCheck, setLangCodeDefault, setMLValue, setModified, setNewMbo, setPropagateKeyFlag, setPropagateKeyFlag, setProxy, setReadonlyWhenParentIsReadonly, setReferencedMbo, setReferencedMbo, setUniqueIDValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValueFromSequence, setValueNull, setValueNull, sigopGranted, sigopGranted, sigopGranted, sigOptionAccessAuthorized, smartFill, smartFind, smartFind, smartFindByObjectName, smartFindByObjectName, smartFindByObjectNameDirect, startCheckpoint, thisToBeUpdated, toBeAdded, toBeDeleted, toBeSaved, toBeUpdated, toBeValidated, undelete, unlock, unselect, useDataSecurity, validate, validateAttributes, validateKeyUniqueness, valueChanged

Methods inherited from class java.lang.Object

equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface psdi.mbo.StatefulMboRemote

canChangeMaxStatus, canChangeStatus, canChangeStatus, canDeleteAttachedDocs, changeMaxStatus, changeMaxStatus, changeStatus, changeStatus, checkForOpenStatus, getInternalStatus, getOnListTab, getOverridePVStatusException, getStatusChangeButtonSigoption, getStatusList, getTargetStatusOption, getValidStatusList, setOnListTab, setOverridePVStatusException, setStatusChangeButtonSigoption, setTargetStatusOption

Methods inherited from interface psdi.mbo.MboRemote

addMboSetForRequiredCheck, addToDeleteForInsertList, blindCopy, checkMethodAccess, clear, copy, copy, copy, copyFake, copyValue, copyValue, createComm, delete, duplicate, evaluateCondition, evaluateCtrlConditions, evaluateCtrlConditions, excludeObjectForPropagate, generateAutoKey, getBoolean, getByte, getBytes, getCommLogOwnerNameAndUniqueId, getDatabaseValue, getDate, getDeleteForInsertList, getDocLinksCount, getDomainIDs, getDouble, getExistingMboSet, getFlags, getFloat, getIgnoreLockCheck, getInitialValue, getInsertCompanySetId, getInsertItemSetId, getInsertOrganization, getInsertSite, getInt, getKeyValue, getLinesRelationship, getList, getLockedByDisplayName, getLong, getMatchingAttr, getMatchingAttr, getMatchingAttrs, getMaxMessage, getMboData, getMboDataSet, getMboInitialValue, getMboList, getMboSet, getMboSet, getMboSet, getMboValueData, getMboValueData, getMboValueData, getMboValueInfoStatic, getMboValueInfoStatic, getMessage, getMessage, getMessage, getMessage, getMXTransaction, getName, getOrgForGL, getOrgSiteForMaxvar, getOwner, getPropagateKeyFlag, getRecordIdentifer, getSiteOrg, getString, getString, getStringInBaseLanguage, getStringInSpecificLocale, getStringTransparent, getThisMboSet, getUniqueIDName, getUniqueIDValue, getUserInfo, getUserName, hasHierarchyLink, hasLockSaveRights, isAutoKeyed, isBasedOn, isFlagSet, isForDM, isLocked, isLocked, isMasterTenant, isMboLockedByMe, isModified, isModified, isNew, isNull, isOptionGranted, isSelected, isZombie, lock, propagateKeyValue, rollbackToCheckpoint, select, setApplicationError, setApplicationRequired, setAutokeyFields, setCopyDefaults, setDeleted, setESigFieldModified, setFieldFlag, setFieldFlag, setFieldFlag, setFieldFlag, setFieldFlag, setFieldFlag, setFieldFlags, setFlag, setFlag, setFlags, setForDM, setIgnoreRecordLockCheck, setMLValue, setModified, setNewMbo, setPropagateKeyFlag, setPropagateKeyFlag, setReferencedMbo, setReferencedMbo, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValue, setValueNull, setValueNull, sigopGranted, sigopGranted, sigopGranted, sigOptionAccessAuthorized, smartFill, smartFind, smartFind, smartFindByObjectName, smartFindByObjectName, smartFindByObjectNameDirect, startCheckpoint, thisToBeUpdated, toBeAdded, toBeDeleted, toBeSaved, toBeUpdated, toBeValidated, undelete, unlock, unselect, validate, validateAttributes

Field Detail

isKitComponentToAddToStore

public boolean isKitComponentToAddToStore

doneRemoveExtra

public boolean doneRemoveExtra

Constructor Detail

Inventory

public Inventory(MboSet ms)
          throws MXException,
                 java.rmi.RemoteException

Constructor for the Inventory Object

Parameters:

ms -

Throws:

MXException

java.rmi.RemoteException

Method Detail

getProcess

public java.lang.String getProcess()

Gets the work flow process for item.

Returns:

the work flow process name for items which is Item.

getStatusListName

public java.lang.String getStatusListName()

Gets the name of the value list that contains all the status's. For Items this is ITEMSTATUS.

Specified by:

getStatusListName in interface StatefulMboRemote

Specified by:

getStatusListName in class StatefulMbo

Returns:

"ITEMSTATUS"

setIsKitComponentToAddToStore

public void setIsKitComponentToAddToStore(boolean isKitComponentToAddToStore)
                                   throws MXException,
                                          java.rmi.RemoteException

Specified by:

setIsKitComponentToAddToStore in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

setIsKitComponentToAddToStore(boolean isKitComponentToAddToStore)

init

public void init()
          throws MXException

init() Initialization rountine. Set field flags for both always readonly attributes as well as those fields which are editable only during insert

Overrides:

init in class Mbo

Throws:

MXException

initFieldFlagsOnMbo

public void initFieldFlagsOnMbo(java.lang.String attrName)
                         throws MXException

Description copied from class: Mbo

The logic of setting the readonly and required field flags to the mbo. Any setting of the field flags that require expensive operation, such as database query should be moved from init() to this method. However, those which don't require steps such as fetching Mbos can be left in init(). You can group the logic for a few attributes together if logic of deciding their flag is the same, or in other words, can be handled at once.

Overrides:

initFieldFlagsOnMbo in class Mbo

Throws:

MXException

add

public void add()
         throws MXException,
                java.rmi.RemoteException

add() Provides defaults for a new Inventory Record. The table below shows the default values for each of the attributes listed.

Attribute Name	Attribute Value
DELIVERYTIME	0(zero)
AVGCOST	0(zero)
STDCOST	0(zero)
LASTCOST	0(zero)
MINLEVEL	0(zero)
ORDERQTY	1(one)
MAXLEVEL	0(zero)
ISSUEYTD	0(zero)
ISSUE1YRAGO	0(zero)
ISSUE2YRAGO	0(zero)
ISSUE3YRAGO	0(zero)
CCF	0(zero)
CATEGORY	The user-defined value for "Stocked Item"
CURBALTOTAL	0(zero)
AVBLBALANCE	0(zero)

Specified by:

add in interface MboRemote

Overrides:

add in class Mbo

Throws:

MXException - MXAccessException thrown when the the user does not have privileges to add an item to a store

java.rmi.RemoteException

setCostType

public void setCostType()
                 throws MXException,
                        java.rmi.RemoteException

This method sets the cost type for the new inventory record. It will default from maxvars.

Specified by:

setCostType in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

setCostType()

appValidate

public void appValidate()
                 throws MXException,
                        java.rmi.RemoteException

last minute validate before save(). non-persistent column conditioncode is required if item is condition enabled

Overrides:

appValidate in class Mbo

Throws:

MXException

java.rmi.RemoteException

isKit

public boolean isKit()
              throws MXException,
                     java.rmi.RemoteException

Is the inventory item a kit?

Specified by:

isKit in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

isKit()

isCapitalized

public boolean isCapitalized()
                      throws MXException,
                             java.rmi.RemoteException

Is the inventory item a capitalized item?

Specified by:

isCapitalized in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

isCapitalized()

save

public void save()
          throws MXException,
                 java.rmi.RemoteException

Save()- Default save functionality. Called by the Mbo architecture. Warnings could be generated if a rotating asset was issued

Throws:

MXException

java.rmi.RemoteException

addUpdateInvVendor

public void addUpdateInvVendor()
                        throws MXException,
                               java.rmi.RemoteException

Add a new InvVendor record if the combination of itemnum/vendor/manufacturer/modelnum does not exist in the Invvendor table. Update catalogcode if the InvVendor which is the primary vendor if catalogcode is changed on the inventory record.

Specified by:

addUpdateInvVendor in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

addUpdateInvVendor()

getPrimaryInvVendor

public MboRemote getPrimaryInvVendor(MboSetRemote invVendSet)
                              throws MXException,
                                     java.rmi.RemoteException

returns the primary InvVendor record if found from the passed InvVendor set.

Parameters:

invVendSet - InvVendorSet for this inventory record.

Throws:

MXException

java.rmi.RemoteException

doAdjustment

public MboRemote doAdjustment(NonPersistentMboRemote invAdj)
                       throws MXException,
                              java.rmi.RemoteException

Calls "Adjust Current Balance", "Adjust Physical Count","Reconcile Current Balance",
"Adjust Standard Cost", or "Adjust Average Cost" depending on the information gathered in the NonPersistentMbo passed.

Parameters:

invAdj - the Non-Persistent Mbo which stores the information gathered in a dialog page.

Returns:

MboRemote an InvTrans record created by the adjustment.

Throws:

MXException

java.rmi.RemoteException

adjustCurrentBalance

public MboRemote adjustCurrentBalance(java.lang.String binnum,
                             java.lang.String lotnum,
                             double newBalance,
                             java.lang.String conditionCode)
                               throws MXException,
                                      java.rmi.RemoteException

adjustCurrentBalance(1,2,3,4) Performs a current balance adjustment on the InvBalances record as identified by lotnum, binnum, and conditionCode

Specified by:

adjustCurrentBalance in interface InventoryRemote

Parameters:

lotnum - The Lot Number of the InvBalance record. A null or an empty string both assume a null value in this field

newBalance - The new current balance

binnum - The Bin Number of the InvBalance record. A null value or an empty string assumes a null value in the InvBalance record

conditionCode - the condition code of the invbalances being fetched

Returns:

Returns the InvTrans Record that was added during the adjustment

Throws:

MXException - Generates an MXAccessException if the user does not have the privileges to perform this transaction

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#adjustCurrentBalance(java.lang.String, java.lang.String, double)

adjustPhysicalCount

public MboRemote adjustPhysicalCount(java.lang.String binnum,
                            java.lang.String lotnum,
                            double quantity,
                            java.util.Date pCountDate)
                              throws MXException,
                                     java.rmi.RemoteException

Specified by:

adjustPhysicalCount in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

adjustPhysicalCount(java.lang.String, java.lang.String, double, java.util.Date)

adjustPhysicalCount

public MboRemote adjustPhysicalCount(java.lang.String binnum,
                            java.lang.String lotnum,
                            double quantity,
                            java.util.Date pCountDate,
                            java.lang.String ownersysid)
                              throws MXException,
                                     java.rmi.RemoteException

adjustPhysicalCount(1,2,3,4,5) Performs a physical count adjustment on the InvBalances record as identified by lotnum and binnum. Checks MXCollab flag - INVPHY; owner1sysid is passed.

Specified by:

adjustPhysicalCount in interface InventoryRemote

Parameters:

lotnum - The Lot Number of the InvBalance record. A null or an empty string both assume a null value in this field

binnum -

pCountDate - The date of the physical count adjustment

quantity - The new physical count

ownersysid - passed to determine if we are going to perform this adjustmenmt or not.

Returns:

Returns the InvTrans Record that was added during the adjustment

Throws:

MXException - Generates an MXAccessException if the user does not have the privileges to perform this transaction

java.rmi.RemoteException

See Also:

adjustPhysicalCount(java.lang.String, java.lang.String, double, java.util.Date, java.lang.String)

adjustPhysicalCount

public MboRemote adjustPhysicalCount(java.lang.String binnum,
                            java.lang.String lotnum,
                            double quantity,
                            java.util.Date pCountDate,
                            java.lang.String ownersysid,
                            java.lang.String conditionCode)
                              throws MXException,
                                     java.rmi.RemoteException

adjustPhysicalCount(1,2,3,4,5,6) Performs a physical count adjustment on the InvBalances record as identified by lotnum and binnum. Checks MXCollab flag - INVPHY; owner1sysid is passed.

Parameters:

lotnum - The Lot Number of the InvBalance record. A null or an empty string both assume a null value in this field

binnum -

pCountDate - The date of the physical count adjustment

quantity - The new physical count

ownersysid - passed to determine if we are going to perform this adjustmenmt or not.

Returns:

Returns the InvTrans Record that was added during the adjustment

Throws:

MXException - Generates an MXAccessException if the user does not have the privileges to perform this transaction

java.rmi.RemoteException

getDefaultIssueCost

public double getDefaultIssueCost(AssetRemote assetRemote,
                         java.lang.String conditionCode)
                           throws MXException,
                                  java.rmi.RemoteException

getDefaultIssueCost(1,2) If user has chosen to call this method (by passing in an AssetRemote, they user has chosen to get the proper issue cost for item which is rotating asset. Looksup the costtype = 'ASSET' If costtype = 'ASSET' - gets asset.invcost and sets to unitcost else - calls getDefaultIssueCost() (or the user sent an itemnumber which isn't rotating Otherwise, returns 0.0

Parameters:

assetRemote - asset mbo to get cost from

conditionCode - condition of the item

Throws:

MXException

java.rmi.RemoteException - NOTE: Issue Cost is always returned in base currency.

getDefaultIssueCost

public double getDefaultIssueCost(AssetRemote assetRemote)
                           throws MXException,
                                  java.rmi.RemoteException

getDefaultIssueCost(1) If user has chosen to call this method (by passing in an AssetRemote, they user has chosen to get the proper issue cost for item which is rotating asset.

Specified by:

getDefaultIssueCost in interface InventoryRemote

Parameters:

assetRemote - asset mbo to get cost from Asset

Throws:

MXException

java.rmi.RemoteException

See Also:

NOTE: Issue Cost is always returned in base currency.

getDefaultIssueCost

public double getDefaultIssueCost()
                           throws MXException,
                                  java.rmi.RemoteException

getDefaultIssueCost() Returns the default issue cost of the inventory's 100% condition rate. Note: Cost Returned is in base Currency.

Specified by:

getDefaultIssueCost in interface InventoryRemote

Returns:

The default issue cost of this inventory's 100% condition rate.

Throws:

MXException

java.rmi.RemoteException

See Also:

getDefaultIssueCost(java.lang.String)

getDefaultIssueCost

public double getDefaultIssueCost(java.lang.String conditionCode)
                           throws MXException,
                                  java.rmi.RemoteException

getDefaultIssueCost(1) Returns the default issue cost of the inventory for the specified condition code. Note: Cost Returned is in base Currency

Specified by:

getDefaultIssueCost in interface InventoryRemote

Parameters:

conditionCode - if conditionCode passed is null, then get the cost of the 100% rate otherwise get the cost from the condition code passed.

Returns:

The default issue cost for this condition code passed.

Throws:

MXException

java.rmi.RemoteException

See Also:

InvCost.getDefaultIssueCost()

getDefaultIssueCost

public double getDefaultIssueCost(java.util.ArrayList<InvLifoFifoCost> invLifoFifoCostList)
                           throws MXException,
                                  java.rmi.RemoteException

This method return the most recent costdate's unit cost if the cost type is LIFO, Otherwise returns least recent costdate's unit cost if the cost type s FIFO.

Parameters:

invLifoFifoCostList -

Returns:

Throws:

MXException

java.rmi.RemoteException

updateInventoryAverageCost

public void updateInventoryAverageCost(double quantity,
                              double totalvalue)
                                throws MXException,
                                       java.rmi.RemoteException

updateInventoryAverageCost(1,2) This method is provided to update the average cost of the item for the specified storeroom. This ASSUMES an EXCHANGERATE of 1. Use other method to specify a separate rate This is called by any transaction that increases INVBALANCES.

Specified by:

updateInventoryAverageCost in interface InventoryRemote

Parameters:

totalvalue - The TOTALVALUE of the QUANTITY (LOADEDCOST)

quantity - QUANTITY (in Issueunits) by which the is being increased

Throws:

MXException

java.rmi.RemoteException

See Also:

updateInventoryAverageCost(double, double)

updateInventoryAverageCost

public void updateInventoryAverageCost(double quantity,
                              double totalvalue,
                              double exr)
                                throws MXException,
                                       java.rmi.RemoteException

This method is provided to update the average cost of the item for the specified storeroom. This is called by any transaction that increases/decrease INVBALANCES

Specified by:

updateInventoryAverageCost in interface InventoryRemote

Parameters:

totalvalue - The TOTALVALUE of the QUANTITY (LOADEDCOST)

exr - EXR - The exchangerate applicable from this transaction to basecurrency

quantity - QUANTITY (in Issueunits) by which the CURBAL is being increased

Throws:

MXException

java.rmi.RemoteException

See Also:

updateInventoryAverageCost(double, double, double)

updateInventoryAverageCost

public void updateInventoryAverageCost(double quantity,
                              double totalvalue,
                              double exr,
                              InvCost invCost)
                                throws MXException,
                                       java.rmi.RemoteException

Throws:

MXException

java.rmi.RemoteException

updateInventoryAverageCost

public void updateInventoryAverageCost(double quantity,
                              double totalvalue,
                              double exr,
                              java.lang.String conditionCode)
                                throws MXException,
                                       java.rmi.RemoteException

This method is provided to update the average cost of the item for the specified storeroom. This is called by any transaction that increase/descrease inventory balances for a specified condition code.

Parameters:

quantity - QUANTITY (in Issueunits) by which the CURBAL is being increased

totalvalue - The TOTALVALUE of the QUANTITY (LOADEDCOST)

exr - EXR - The exchangerate applicable from this transaction to basecurrency

invBalances - the invbalances record being updated

conditionCode - - the condition of the inventory

Throws:

MXException - - when invcost is not found.

java.rmi.RemoteException

See Also:

psdi.app.inventory.InvCost#updateAverageCost(double,double,double,MboRemote)

getInvCostRecord

public MboRemote getInvCostRecord(java.lang.String conditionCode)
                           throws MXException,
                                  java.rmi.RemoteException

returns InvCost mbo based on the conditionCode passed

Parameters:

conditionCode -

Returns:

an InvCost mbo(maybe a null if the invcost record specified does not exist in the database yet.)

Throws:

MXException

java.rmi.RemoteException

addInvLifoFifoCostRecord

public MboRemote addInvLifoFifoCostRecord(java.lang.String conditioncode)
                                   throws MXException,
                                          java.rmi.RemoteException

Add an invlifofifocost record.

Specified by:

addInvLifoFifoCostRecord in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

addInvLifoFifoCostRecord( String)

updateInventoryIssueDetails

public void updateInventoryIssueDetails(java.util.Date issDate,
                               double quantity)
                                 throws MXException,
                                        java.rmi.RemoteException

updateInventoryIssueDetails(1,2) This method updates the inventory record for the item-storeroom with details about the last issue date and issue YTD.

Specified by:

updateInventoryIssueDetails in interface InventoryRemote

Parameters:

quantity - The Quantity being issued

issDate - Date on which the issue is being made

Throws:

MXException

java.rmi.RemoteException

See Also:

updateInventoryIssueDetails(java.util.Date, double)

updateInventoryLastCost

public void updateInventoryLastCost(double unitcost)
                             throws MXException,
                                    java.rmi.RemoteException

updateInventoryLastCost(1) This method updates the inventory record with details about the last cost at which the item was PURCHASED. This assumes an exchange rate of 1.

Specified by:

updateInventoryLastCost in interface InventoryRemote

Parameters:

unitcost - UNITCOST - The Unit purchase cost of the item in the transaction currency

Throws:

MXException

java.rmi.RemoteException

See Also:

updateInventoryLastCost(double)

updateInventoryLastCost

public void updateInventoryLastCost(double unitcost,
                           double exr)
                             throws MXException,
                                    java.rmi.RemoteException

updateInventoryLastCost(1,2) This method updates the inventory record with details about the last cost at which the item was PURCHASED.

Specified by:

updateInventoryLastCost in interface InventoryRemote

Parameters:

exr - EXR - The exchangerate applicable from this transaction to basecurrency

unitcost - UNITCOST - The Unit purchase cost of the item in the transaction currency

Throws:

MXException

java.rmi.RemoteException

See Also:

updateInventoryLastCost(double, double)

updateInventoryLastCost

public void updateInventoryLastCost(double unitcost,
                           double exr,
                           InvCost invcost)
                             throws MXException,
                                    java.rmi.RemoteException

updateInventoryLastCost(1,2) This method updates the inventory record with details about the last cost at which the item was PURCHASED.

Specified by:

updateInventoryLastCost in interface InventoryRemote

Parameters:

exr - EXR - The exchangerate applicable from this transaction to basecurrency

unitcost - UNITCOST - The Unit purchase cost of the item in the transaction currency

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.InvCost#updateLastCost()

updateInventoryDeliveryTime

public void updateInventoryDeliveryTime(double deliveryTime)
                                 throws MXException,
                                        java.rmi.RemoteException

updateInventoryDeliveryTime(1) This method updates inventory.delivertime with the value passed in

Specified by:

updateInventoryDeliveryTime in interface InventoryRemote

Parameters:

double - deliveryTime - The deliverytime in double format

Throws:

MXException

java.rmi.RemoteException

See Also:

updateInventoryDeliveryTime(double)

adjustAverageCost

public MboRemote adjustAverageCost(double newcost,
                          java.lang.String conditionCode)
                            throws MXException,
                                   java.rmi.RemoteException

adjustAverageCost(1,2) Adjust Inventory Average Cost (AVGCSTADJ) This method is used to carry out an average cost adjustment (not updating as in receipts/ returns). The New Average Cost specified is assumed to be in the currency units corresponding to BASE1. Average Cost Adjustment updates this object with the new AVGCOST.

Specified by:

adjustAverageCost in interface InventoryRemote

Parameters:

newcost - The NEWCOST i.e. the new value of the average cost for the item-storeroom, in the currency units corresponding to BASE1

Returns:

Returns the InvTrans Record that was added during the adjustment

Throws:

MXException - Generates an MXAccessException if the user does not have the privileges to perform this transaction.

MXApplicationException - thrown if the item is capitalized or if the new cost is the same as the old cost

java.rmi.RemoteException

See Also:

adjustAverageCost(double,String)

changeStockCategory

public void changeStockCategory(java.lang.String newcat)
                         throws MXException,
                                java.rmi.RemoteException

changeStockCategory(1) This method changes the Inventory.CATEGORY of an item in a storeroom to the value passed in.

Specified by:

changeStockCategory in interface InventoryRemote

Parameters:

newcat - The Category for this item

Throws:

MXException

java.rmi.RemoteException

See Also:

changeStockCategory(java.lang.String)

adjustStandardCost

public MboRemote adjustStandardCost(double newcost,
                           java.lang.String conditionCode)
                             throws MXException,
                                    java.rmi.RemoteException

adjustStandardCost(1,2) Adjust Inventory Standard Cost (STDCSTADJ) This method is used to carry out a standard cost adjustment. The New Standard Cost specified is assumed to be in the currency units corresponding to BASE1.

Specified by:

adjustStandardCost in interface InventoryRemote

Parameters:

newcost - The NEWCOST i.e. the new value of the standard cost for the item-storeroom, in the currency units corresponding to BASE1

conditionCode - the InvCost record for the ConditionCode

Returns:

Returns the InvTrans record that was added during the Transaction

Throws:

MXException - Generates an MXAccessException if the user does not have the privileges to perform this transaction. MXApplicationException thrown if the item is capitalized or if the new cost is the same as the old cost

java.rmi.RemoteException

See Also:

adjustStandardCost(double,String)

getDefaultAverageCost

public double getDefaultAverageCost()
                             throws MXException,
                                    java.rmi.RemoteException

getDefaultAverageCost() Returns the default average cost (inventory.avgcost)

Specified by:

getDefaultAverageCost in interface InventoryRemote

Returns:

Default Average Cost

Throws:

MXException

java.rmi.RemoteException

See Also:

getDefaultAverageCost()

zeroYTDQuantities

public void zeroYTDQuantities()
                       throws MXException,
                              java.rmi.RemoteException

zeroYTDQuantities() This method zeros the year to date quantity and moves the issue1yr/2yr/3yr back a year each respectively.

Specified by:

zeroYTDQuantities in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

zeroYTDQuantities()

reconcileBalances

public void reconcileBalances()
                       throws MXException,
                              java.rmi.RemoteException

reconcileBalances() This Reconciling Balances method is done at the storeroom level. The new current balance is determined by taking into account any issues, transfers, receipts and returns that may have taken place between the time of the physical count and the time of the reconcile. This method identifies all the InvBalances Records and invokes the reconcileBalances() method on each It checks MXCollab rules of integration for PCID = INVPHY

Specified by:

reconcileBalances in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

reconcileBalances()

reconcileBalances

public void reconcileBalances(java.lang.String controlacc,
                     java.lang.String shrinkageacc,
                     java.lang.String remark)
                       throws MXException,
                              java.rmi.RemoteException

reconcileBalances(1,2,3) This Reconciling Balances method is done at the storeroom level. The new current balance is determined by taking into account any issues, transfers, receipts and returns that may have taken place between the time of the physical count and the time of the reconcile. This method identifies all the InvBalances Records and invokes the reconcileBalances() method on each It checks MXCollab rules of integration for PCID = INVPHY

Specified by:

reconcileBalances in interface InventoryRemote

Parameters:

controlacc - The inventory's control account

shrinkageacc - The inventory's shrinkage account

remark - The remark for this reconcilliation

Throws:

MXException

java.rmi.RemoteException

See Also:

reconcileBalances()

reconcileBalances

public MboRemote reconcileBalances(java.lang.String binnum,
                          java.lang.String lotnum)
                            throws MXException,
                                   java.rmi.RemoteException

reconcileBalances(1,2) This Reconciling Balances method is done at the storeroom/binnum/lotnum level. The new current balance is determined taking into account any issues, transfers, receipts and returns that may have taken place between the time of the physical count and the time of the reconcile. This finds the InvBalances record and runs reconcileBalances(). It checks MXCollab rules of integration for PCID = INVPHY

Specified by:

reconcileBalances in interface InventoryRemote

Parameters:

lotnum - The Lotnum at which the reconciling will be done

binnum - The binnum at which the reconciling will be done RETURN: the invtrans record created as a result of reconcileBalances() call

Throws:

MXException - Generates an MXAccessException if the user does not have the privileges to perform this transaction. MXApplicationException is thrown if the corrsponding record has already been reconciled

java.rmi.RemoteException

See Also:

reconcileBalances(java.lang.String, java.lang.String)

getCurrentBalance

public double getCurrentBalance(java.lang.String binnum,
                       java.lang.String lotnum)
                         throws MXException,
                                java.rmi.RemoteException

getCurrentBalance(1,2) Returns the current balance for this item/location combination, assuming conditionCode is null

Specified by:

getCurrentBalance in interface InventoryRemote

Parameters:

lotnum - The lotnum which will be used while determining the current balance

binnum - The binnum which will be used while determining physical count

Returns:

double = invbalance.curbal

Throws:

MXException

java.rmi.RemoteException

See Also:

getCurrentBalance(java.lang.String, java.lang.String)

getCurrentBalance

public double getCurrentBalance(java.lang.String binnum,
                       java.lang.String lotnum,
                       java.lang.String conditionCode)
                         throws MXException,
                                java.rmi.RemoteException

getCurrentBalance(1,2,3) Returns the current balance for this item/location combination if binnum/lotnum/conditionCode passed into this method as null, they will NOT be considered when retrieving balance set! if binnum/lotnum/ConditionCode passed into this method as "", they will be treated as a null (eg. where binnum/lotnum is null)

Specified by:

getCurrentBalance in interface InventoryRemote

Parameters:

conditionCode - the condition code which will be used while determining the current balance

lotnum - The lotnum which will be used while determining the current balance

binnum - The binnum which will be used while determining physical count

Returns:

double = invbalance.curbal

Throws:

MXException

java.rmi.RemoteException

See Also:

getCurrentBalance(java.lang.String, java.lang.String,String conditionCode)

getPhysicalCount

public double getPhysicalCount(java.lang.String binnum,
                      java.lang.String lotnum)
                        throws MXException,
                               java.rmi.RemoteException

getPhysicalCount(1,2) Returns the physical count for this item/location combination if binnum/lotnum passed into this method as null, they will NOT be considered when retrieving balance set! if binnum/lotnum passed into this method as "", they will be treated as a null (eg. where binnum/lotnum is null)

Specified by:

getPhysicalCount in interface InventoryRemote

Parameters:

lotnum - The lotnum which will be used while determining the current balance

binnum - The binnum which will be used while determining physical count

Returns:

double = invbalance.curbal

Throws:

MXException

java.rmi.RemoteException

See Also:

getPhysicalCount(java.lang.String, java.lang.String)

getPhysicalCount

public double getPhysicalCount(java.lang.String binnum,
                      java.lang.String lotnum,
                      java.lang.String conditionCode)
                        throws MXException,
                               java.rmi.RemoteException

getPhysicalCount(1,2) Returns the physical count for this item/location combination if binnum/lotnum passed into this method as null, they will NOT be considered when retrieving balance set! if binnum/lotnum passed into this method as "", they will be treated as a null (eg. where binnum/lotnum is null)

Parameters:

lotnum - The lotnum which will be used while determining the current balance

binnum - The binnum which will be used while determining physical count

conditionCode - the conditionCode which will be used while determining the current balance

Returns:

double = invbalance.curbal

Throws:

MXException

java.rmi.RemoteException

addInvBalancesRecord

public InvBalancesRemote addInvBalancesRecord(java.lang.String binnum,
                                     java.lang.String lotnum,
                                     double curbal)
                                       throws MXException,
                                              java.rmi.RemoteException

addInvBalancesRecord(1,2,3) Adds an InvBalance record, setting the values to those passed in for bin,lot, and quantity Also, defaults the physcnt attribute to the same as curbal - the passed in quantity

Specified by:

addInvBalancesRecord in interface InventoryRemote

Parameters:

lotnum - - string of lotnum

binnum - - string of binnum

quantity - - the curbal which should be assigned to this new invbal.

Throws:

MXException

java.rmi.RemoteException

See Also:

addInvBalancesRecord(java.lang.String, java.lang.String, double)

addInvBalancesRecord

public InvBalancesRemote addInvBalancesRecord(java.lang.String binnum,
                                     java.lang.String lotnum,
                                     double curbal,
                                     java.lang.String conditionCode)
                                       throws MXException,
                                              java.rmi.RemoteException

addInvBalancesRecord(1,2,3,4) Adds an InvBalance record, setting the values to those passed in for bin,lot, and quantity Also, defaults the physcnt attribute to the same as curbal - the passed in quantity

Specified by:

addInvBalancesRecord in interface InventoryRemote

Parameters:

conditionCode - - condition code for the item

lotnum - - string of lotnum

binnum - - string of binnum

quantity - - the curbal which should be assigned to this new invbal.

Throws:

MXException

java.rmi.RemoteException

See Also:

addInvBalancesRecord(java.lang.String, java.lang.String, double,java.lang.String)

canDelete

public void canDelete()
               throws MXException,
                      java.rmi.RemoteException

Inventory.canDelete()- Checks to see if this object can be deleted if it is on a jobplan, throw exception if it is on a reservation, throw exception if this is on an open WO, throw exception if this is on an open MR, throw exception if this is on an open PR, throw exception if this is on an open PO, throw exception if this is on any invbalance record with balance > 0, throw exception

Overrides:

canDelete in class Mbo

Throws:

MXException - - will throw this exception if it can't be deleted

java.rmi.RemoteException

delete

public void delete(long access)
            throws MXException,
                   java.rmi.RemoteException

delete(1) If we delete Inventory, then delete all InvBalance records associated with this Inventory. canDelete() has already been performed on each and every invbalance record associated with this inventory in the inventory.canDelete()

Specified by:

delete in interface MboRemote

Overrides:

delete in class Mbo

Parameters:

access - The bitwise flag specified to determine if certain normal security checks are to be bypassed for this delete request. For example: if the accessModifer is NOACCESSCHECK, then the check for the object's NODELETE flag and the call to the object's canDelete() method will not be performed. If the accessModifer is NONE, then all the access checks are performed before this object is marked delete.

Throws:

MXException

java.rmi.RemoteException

See Also:

Mbo.delete(long)

getInvBalanceRecord

public InvBalances getInvBalanceRecord(java.lang.String binnum,
                              java.lang.String lotnum,
                              java.lang.String conditionCode)
                                throws MXException,
                                       java.rmi.RemoteException

getInvBalanceRecord(1,2,3) - PACKAGE access Seeks out a InvBalance mbo based on passed in values for bin and lot

Parameters:

conditionCode -

lotnum -

binnum - Because this method seeks a genuine InvBalance record, binnum, lotnum, and conditionCode must be considered. If the parameters are passed as null, they will be sent to getInvBalanceSet (package method) with "", which will then search for them where 'binnum is null'/'lotnum is null' respectively. A Balance record cannot really be retrieved without specifying all four parameters itemnum/location/binnum/lotnum

Throws:

MXException

java.rmi.RemoteException

getInvBalanceRecord

public InvBalances getInvBalanceRecord(java.lang.String binnum,
                              java.lang.String lotnum,
                              java.lang.String conditionCode,
                              java.lang.String storeLoc,
                              java.lang.String storeSite)
                                throws MXException,
                                       java.rmi.RemoteException

getInvBalanceRecord(1,2,3,4) - PACKAGE access Seeks out a InvBalance mbo based on passed in values for bin and lot

Parameters:

conditionCode -

lotnum -

binnum - Because this method seeks a genuine InvBalance record, binnum, lotnum, conditionCode and storeLoc must be considered. If the parameters are passed as null, they will be sent to getInvBalanceSet (package method) with "", which will then search for them where 'binnum is null'/'lotnum is null' respectively. A Balance record cannot really be retrieved without specifying all four parameters itemnum/location/binnum/lotnum

Throws:

MXException

java.rmi.RemoteException

getInvBalancesSetForKitComponent

public MboSetRemote getInvBalancesSetForKitComponent(java.lang.String binnum)
                                              throws MXException,
                                                     java.rmi.RemoteException

returns the set of InvBalances across all bins to satisfy the amount needed to assemble a kit. Multiple bins can be used to fulfill this amount.

Specified by:

getInvBalancesSetForKitComponent in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

#getInvBalancesSetForKit(String binnum), getInvBalanceSet(String binnum, String lotnum,String conditionCode), psdi.app.inventory.MatRecTrans#doKitBreakInvBalanceUpdates(MboRemote kitComponent,KitRemote kit), psdi.app.inventory.MatRecTrans#doKitMakeInvBalanceUpdates()

createIssue

public MboRemote createIssue()
                      throws MXException,
                             java.rmi.RemoteException

createIssue() This remote inventory method was created to provide callers the ability to issue this inventory record without passing any parameters whatsoever. The method will accomplish the following: 1) - check integration rules for the INVISS flag ("can caller create a matusetrans?") integration rules will be checked using the inventory ownersysid and THISMX 2) - create a matusetrans mbo and return the mbo EXCEPTIONS: a MXApplicationException will be thrown if caller does not pass integration rules check! RETURN: method returns a MboRemote which will contain either null or the newly generated MatUseTrans mbo.

Specified by:

createIssue in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

createIssue()

isStocked

public boolean isStocked()
                  throws MXException,
                         java.rmi.RemoteException

isStocked() Returns true if the ITEMORGINFO "CATEGORY" has a maxvalue of "STK" else returns false

Specified by:

isStocked in interface InventoryRemote

Returns:

returns true if the maxvalue of "inventory.category" is "STK"

Throws:

MXException

java.rmi.RemoteException

See Also:

isStocked()

isNonStocked

public boolean isNonStocked()
                     throws MXException,
                            java.rmi.RemoteException

isNonStocked() Returns true if the ITEMORGINFO "CATEGORY" has a maxvalue of "NS" else returns false

Specified by:

isNonStocked in interface InventoryRemote

Returns:

returns true if the maxvalue of "inventory.category" is "NS"

Throws:

MXException

java.rmi.RemoteException

See Also:

isNonStocked()

isSpecialOrder

public boolean isSpecialOrder()
                       throws MXException,
                              java.rmi.RemoteException

isSpecialOrder() Returns true if the ITEMORGINFO "CATEGORY" has a maxvalue of "NS" else returns false

Specified by:

isSpecialOrder in interface InventoryRemote

Returns:

returns true if the maxvalue of "inventory.category" is "SP"

Throws:

MXException

java.rmi.RemoteException

See Also:

isSpecialOrder()

changeCapitalizedStatus

public void changeCapitalizedStatus(boolean capitalized)
                             throws MXException,
                                    java.rmi.RemoteException

Deprecated. Replaced by changeCapitalizedStatus(boolean capitalized, String capitalacc, String memo)

changeCapitalizedStatus(1) This method will set cost & gl accout values upon change to the capitalized flag on Item. InvTrans records at the condition code level are created to store this transaction as CAPCSTADJ.

Specified by:

changeCapitalizedStatus in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

changeCapitalizedStatus(boolean)

changeCapitalizedStatus

public void changeCapitalizedStatus(boolean capitalized,
                           java.lang.String capitalacc,
                           java.lang.String memo)
                             throws MXException,
                                    java.rmi.RemoteException

sets cost & gl accout values upon changing the capitalized flag on Item. InvTrans records are created at the condition code level to store this transaction as CAPCSTADJ.

Specified by:

changeCapitalizedStatus in interface InventoryRemote

Parameters:

capitalized - If true, item will be capitalized. If false, item will be non-capitalized.

capitalacc - GL Capital Account value provided through the UI

memo - free-form text to be written to InvTrans.Memo

Throws:

MXException

java.rmi.RemoteException

See Also:

Item.changeCapitalizedStatus(boolean,java.lang.String,java.lang.String)

calculateCurrentBalance

public double calculateCurrentBalance()
                               throws MXException,
                                      java.rmi.RemoteException

Method to calculate current balance
Calculates sum of current balances in invbalances for a itemnum and location

Specified by:

calculateCurrentBalance in interface InventoryRemote

Parameters:

None -

Returns:

current balance

Throws:

MXException - - MAXIMO System error

java.rmi.RemoteException - - RMI error

See Also:

calculateCurrentBalance()

calculateRQtyNotStaged

public double calculateRQtyNotStaged()
                              throws MXException,
                                     java.rmi.RemoteException

Method to calculate reserved quantity without Staged quantity.
Calculates sum of reserved quantity in invreserve for a itemnum and location

Parameters:

None -

Returns:

reserved qty

Throws:

MXException - - MAXIMO System error

java.rmi.RemoteException - - RMI error

calculateStagedQty

public double calculateStagedQty()
                          throws MXException,
                                 java.rmi.RemoteException

Method to calculate staged quantity.
Calculates sum of staged quantity in invreserve for a itemnum and location

Parameters:

None -

Returns:

reserved qty

Throws:

MXException - - MAXIMO System error

java.rmi.RemoteException - - RMI error

calculateShippedQty

public double calculateShippedQty()
                           throws MXException,
                                  java.rmi.RemoteException

Method to calculate shipped quantity.
Calculates sum of shipped quantity less the already-received quantity for an itemnum and location

Parameters:

None -

Returns:

reserved qty

Throws:

MXException - - MAXIMO System error

java.rmi.RemoteException - - RMI error

calculateReceivedQty

public double calculateReceivedQty()
                            throws MXException,
                                   java.rmi.RemoteException

Throws:

MXException

java.rmi.RemoteException

calculateHardShippedQty

public double calculateHardShippedQty()
                               throws MXException,
                                      java.rmi.RemoteException

Method to calculate hard reserved shipped quantity.
Calculates sum of shipped quantity in invreserve that are hard reservations for a itemnum and location

Parameters:

None -

Returns:

reserved qty

Throws:

MXException - - MAXIMO System error

java.rmi.RemoteException - - RMI error

calculateAvailableQty

public double calculateAvailableQty()
                             throws MXException,
                                    java.rmi.RemoteException

Method to calculate available quantity Calculates available quantity by subtracting reserved qty and expired qty from current balance for a itemnum and location

Specified by:

calculateAvailableQty in interface InventoryRemote

Parameters:

None -

Returns:

available balance

Throws:

MXException - - MAXIMO System error

java.rmi.RemoteException - - RMI error

See Also:

calculateAvailableQty()

setAutoCreateInvCost

public void setAutoCreateInvCost(boolean flag)
                          throws MXException,
                                 java.rmi.RemoteException

Should an InvCost be automatically created if the object is new?

Parameters:

flag - true or false to indicate if an InvCost is to be created automatically.

Throws:

none

MXException

java.rmi.RemoteException

setAutoCreateInvBalances

public void setAutoCreateInvBalances(boolean flag)
                              throws MXException,
                                     java.rmi.RemoteException

Should an InvBalances be automatically created if the object is new?

Parameters:

flag - true or false to indicate if an InvBalances is to be created automatically.

Throws:

none

MXException

java.rmi.RemoteException

canTransferCurrentItem

public void canTransferCurrentItem()
                            throws MXException,
                                   java.rmi.RemoteException

Determines if the item is rotating before trying to transfer. If it is, throws an exception.

Specified by:

canTransferCurrentItem in interface InventoryRemote

Parameters:

None -

Throws:

MXApplicationException - (transferNonRotOnly) thrown if the item is rotating

MXException

java.rmi.RemoteException

canIssueCurrentItem

public void canIssueCurrentItem()
                         throws MXException,
                                java.rmi.RemoteException

can this inventory item be used issued to Asset?

Specified by:

canIssueCurrentItem in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

canIssueCurrentItem()

getInventoryStatus

public java.lang.String getInventoryStatus()
                                    throws MXException,
                                           java.rmi.RemoteException

Returns the inventory status.

Specified by:

getInventoryStatus in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

getInventoryStatus()

canAdjustStdCost

public void canAdjustStdCost()
                      throws MXException,
                             java.rmi.RemoteException

Determines if the item is capitalized. if it is, do not allow standard cost adjustment

Specified by:

canAdjustStdCost in interface InventoryRemote

Parameters:

None -

Throws:

MXApplicationException - (transferNonRotOnly) thrown if the item is rotating

MXException

java.rmi.RemoteException

See Also:

canAdjustStdCost()

canAdjustAvgCost

public void canAdjustAvgCost()
                      throws MXException,
                             java.rmi.RemoteException

Determines if the item is capitalized. if it is, do not allow average cost adjustment

Specified by:

canAdjustAvgCost in interface InventoryRemote

Parameters:

None -

Throws:

MXApplicationException - (transferNonRotOnly) thrown if the item is rotating

MXException

java.rmi.RemoteException

See Also:

canAdjustAvgCost()

canAdjustBalance

public void canAdjustBalance()
                      throws MXException,
                             java.rmi.RemoteException

Determines if the item is rotating. if it is, do not allow Current Balance adjustment

Specified by:

canAdjustBalance in interface InventoryRemote

Parameters:

None -

Throws:

MXApplicationException - is thrown if the item is rotating

MXException

java.rmi.RemoteException

See Also:

canAdjustBalance()

canReconcileBalances

public void canReconcileBalances()
                          throws MXException,
                                 java.rmi.RemoteException

Determines if all of the invBalances for this Inventory record have been reconciled. If they are all reconciled, throws an exception

Specified by:

canReconcileBalances in interface InventoryRemote

Parameters:

None -

Throws:

MXApplicationException - (invbalCannotReconcile) thrown if the invBalances for this item have already been reconciled

MXException

java.rmi.RemoteException

updateCurrentBalance

public MboRemote updateCurrentBalance(java.lang.String binnum,
                             java.lang.String lotnum,
                             java.lang.String conditionCode,
                             double toIncrement)
                               throws MXException,
                                      java.rmi.RemoteException

updateCurrentBalance(1,2,3,4) Increment the curbal by the double passed on the InvBalances record as identified by lotnum and binnum. The passed double could be positive or negative.

Specified by:

updateCurrentBalance in interface InventoryRemote

Parameters:

binnum - The Bin Number of the InvBalance record. A null value or an empty string assumes a null value in the InvBalance record

lotnum - The Lot Number of the InvBalance record. A null or an empty string both assume a null value in this field

conditionCost - condition code for the invbalances to be updated

Returns:

Returns the InvBalances

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#updateCurrentBalance(String binnum, String lotnum, double toIncrement)

getErrorMsg

public MXApplicationException getErrorMsg()
                                   throws java.rmi.RemoteException

Returns the error message, if any, for this inventory object. If the user can only access some storerooms only, they can only view the storerooms they are not authorized.

Specified by:

getErrorMsg in interface InventoryRemote

Throws:

java.rmi.RemoteException

See Also:

getErrorMsg()

canDoAction

public void canDoAction()
                 throws MXException,
                        java.rmi.RemoteException

Can we perform inventory adjustments?

Specified by:

canDoAction in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

canDoAction()

siteReceiptsAndTransfers

public MboSetRemote siteReceiptsAndTransfers()
                                      throws MXException,
                                             java.rmi.RemoteException

returns set of MatRecTrans associated with this Inventory's itemnum/location combination and the Login user's SiteId. This SiteId's relation to the MatRecTrans object can be via either the MatRecTrans.SiteId or the MatRecTrans.FromSiteId attributes. In the case of the former, the MatRecTrans.ToStoreLoc attribute is the foreign MBO's location-related attribute of interest. In the case of the latter, the MatRecTrans.FromStoreLoc attribute is the foreign MBO's location-related attribute of interest. The WHERE clause is:

"itemnum = :itemnum and itemsetid = :itemsetid and ( (siteid=:1 and tostoreloc=:location) or (fromsiteid=:1 AND FROMSTORELOC=:location) )"

The bind variable ":1" contains the user's Login site

Specified by:

siteReceiptsAndTransfers in interface InventoryRemote

Returns:

MboSetRemote if there are MatRecTrans records that meet the criteria

Throws:

MXException

java.rmi.RemoteException

See Also:

siteReceiptsAndTransfers()

setKitAction

public void setKitAction(java.lang.String makeOrBreak)
                  throws MXException,
                         java.rmi.RemoteException

called when menu action is chosen to Assemble Kit or Disassemble Kit

Specified by:

setKitAction in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.webclient.beans.inventory.InventoryAppBean.kitPrepare(), getKitAction()

getKitAction

public java.lang.String getKitAction()
                              throws MXException,
                                     java.rmi.RemoteException

set when menu action is chosen to Assemble Kit or Disassemble Kit

Specified by:

getKitAction in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.webclient.beans.inventory.InventoryAppBean.kitPrepare(), setKitAction(String makeOrBreak), getKitAction(), Kit.add()

kitMakeOrBreak

public void kitMakeOrBreak(KitRemote kit)
                    throws MXException,
                           java.rmi.RemoteException

manage kit balances

Specified by:

kitMakeOrBreak in interface InventoryRemote

Parameters:

kit - non-persistent kit object containing required values

Throws:

MXException

java.rmi.RemoteException

See Also:

kitMake(KitRemote kit), kitBalanceIncrement(KitRemote kit), kitMakeKitInventoryUpdate(KitRemote kit), kitBreak(KitRemote kit), kitBalanceDecrement(KitRemote kit), kitHandleCostVariance()

canKit

public void canKit()
            throws MXException,
                   java.rmi.RemoteException

can this inventory item be used for kitting?

Specified by:

canKit in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

canKit()

refreshCountDate

public void refreshCountDate()
                      throws MXException,
                             java.rmi.RemoteException

set the adjustedphscntdate in the invbalances when the inventory.physcntdate is changed

Specified by:

refreshCountDate in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.refreshCountDate()

copyAssetsForIssue

public void copyAssetsForIssue(MboSetRemote assetSet,
                      MboRemote issueItemToAssetMbo)
                        throws java.rmi.RemoteException,
                               MXException

Used by "Issue Item to Multiple Assets" to copy a set of assets to IssueCurrentItemMbos.

Specified by:

copyAssetsForIssue in interface InventoryRemote

Parameters:

assetSet - the MboSetRemote of AssetSetRemote instance. Only process the selected rows.

issueItemToAssetMbo - the MboRemote of IssueItemToAssetMbo instance. This Mbo will do the actual copying.

Throws:

java.rmi.RemoteException

MXException

See Also:

psdi.iapp.inventory.Inventory#copyAssetsForIssue(MboSetRemote assetSet, MboRemote issueItemToAssetMbo)

checkRequestAgainstItemMaxIssue

public void checkRequestAgainstItemMaxIssue(java.lang.String assetnum,
                                   double qtyRequested)
                                     throws MXException,
                                            java.rmi.RemoteException

checks to make sure that the sum of the quantity being issued to an asset or work order and the sum of the total issued quantity (ISSUEDQTY in the SPAREPART table for the given item and asset combination) is less than or equal to the maximum permissible quantity (MAXISSUE in ITEM table)

Specified by:

checkRequestAgainstItemMaxIssue in interface InventoryRemote

Parameters:

assetnum - asset to which item is being issued

qtyRequested - quantity being issued to asset

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.virtual.ITSMEFldMatUseTransAssetnum#validate(), psdi.app.inventory.virtual.ITSMEFldMatUseTransQuantity#validate()

checkWOExists

public boolean checkWOExists()
                      throws MXException,
                             java.rmi.RemoteException

This method checks if the item exist in WPItem for work orders that are in a status other than COMP or CLOSE

Specified by:

checkWOExists in interface InventoryRemote

Returns:

- true if exists in WPItem Otherwise false.

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#checkWorkOrder()

checkInvBalancesExists

public boolean checkInvBalancesExists()
                               throws MXException,
                                      java.rmi.RemoteException

This method checks if the item exist in InvBalances.

Specified by:

checkInvBalancesExists in interface InventoryRemote

Returns:

- true if exists in InvBalances Otherwise false.

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#checkInvBalances()

checkAssetExists

public boolean checkAssetExists()
                         throws MXException,
                                java.rmi.RemoteException

This method checks if the item exist in Asset.

Specified by:

checkAssetExists in interface InventoryRemote

Returns:

- true if exists in InvBalances Otherwise false.

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#checkAsset()

checkJPExists

public boolean checkJPExists()
                      throws MXException,
                             java.rmi.RemoteException

This method checks if the item exist in JobItem for job plans that are in a status other than INACTIVE.

Specified by:

checkJPExists in interface InventoryRemote

Returns:

- true if exists in JobItem Otherwise false.

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#checkJobPlan()

checkMRExists

public boolean checkMRExists()
                      throws MXException,
                             java.rmi.RemoteException

This method checks if the item exist in MRLine for MR that are in a status other than CAN or CLOSE

Specified by:

checkMRExists in interface InventoryRemote

Returns:

- true if exists in MRLine Otherwise false.

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#checkMR()

checkPRExists

public boolean checkPRExists()
                      throws MXException,
                             java.rmi.RemoteException

This method checks if the item exist in PRLine for PR that are in a status other than CAN or COMP.

Specified by:

checkPRExists in interface InventoryRemote

Returns:

- true if exists in PRLine Otherwise false.

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#checkPR()

checkPOExists

public boolean checkPOExists()
                      throws MXException,
                             java.rmi.RemoteException

This method checks if the item exist in POLine for PO that are in a status other than CAN or CLOSE.

Specified by:

checkPOExists in interface InventoryRemote

Returns:

- true if exists in POLine Otherwise false.

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#checkPO()

checkContractExists

public boolean checkContractExists()
                            throws MXException,
                                   java.rmi.RemoteException

This method checks if the item exist in ContractLine for Contract that are in a status other than CAN or CLOSE.

Specified by:

checkContractExists in interface InventoryRemote

Returns:

- true if exists in ContractLine Otherwise false.

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#checkContracExists()

checkCIExists

public boolean checkCIExists()
                      throws MXException,
                             java.rmi.RemoteException

This method checks if the item exist in CI.

Specified by:

checkCIExists in interface InventoryRemote

Returns:

- true if exists in CI Otherwise false.

Throws:

MXException

java.rmi.RemoteException

See Also:

checkCIExists()

changeStatus

public void changeStatus(java.lang.String status,
                java.util.Date date,
                java.lang.String memo,
                long accessModifier)
                  throws MXException,
                         java.rmi.RemoteException

This method is overridden to add a wrapper to exceptions thrown during change status and to write warnings whether or not the status change is successful

Specified by:

changeStatus in interface InventoryRemote

Specified by:

changeStatus in interface StatefulMboRemote

Overrides:

changeStatus in class StatefulMbo

Parameters:

status - The new desired status. This is the translated status (that is, the status code as it would have been entered by a user, or valuelist.value), not the internal status value (valuelist.maxvalue).

date - The effective date of the new status is current date/time.

memo - A string briefly describing the circumstances of the change. The memo can be null.

accessModifier - A value of NOACCESSCHECK will cause the method not to call canChangeStatus. Callers using this flag are responsible for ensuring that they are attempting a valid status change.

Throws:

MXException - Thrown if there is a problem.

java.rmi.RemoteException

See Also:

StatefulMbo.canChangeStatus(String)

validateChangeStatus

public void validateChangeStatus(java.lang.String status,
                        java.util.Date date,
                        java.lang.String memo)
                          throws MXException,
                                 java.rmi.RemoteException

This method validates if the status change is allowed.

Specified by:

validateChangeStatus in interface InventoryRemote

Throws:

MXException - Thrown if there is a problem.

java.rmi.RemoteException

See Also:

validateChangeStatus(String status, Date date, String memo)

isPendobs

public boolean isPendobs()
                  throws MXException,
                         java.rmi.RemoteException

Returns true if this item was pending obsolence.

Specified by:

isPendobs in interface InventoryRemote

Returns:

true if this item is in pending obsolence.

Throws:

MXException

java.rmi.RemoteException

See Also:

isPendobs()

isObsolete

public boolean isObsolete()
                   throws MXException,
                          java.rmi.RemoteException

Returns true if this item was Obsolete.

Specified by:

isObsolete in interface InventoryRemote

Returns:

true if this item is in Obsolete.

Throws:

MXException

java.rmi.RemoteException

See Also:

isObsolete()

isPlanning

public boolean isPlanning()
                   throws MXException,
                          java.rmi.RemoteException

Returns true if this item was Obsolete.

Specified by:

isPlanning in interface InventoryRemote

Returns:

true if this item is in Obsolete.

Throws:

MXException

java.rmi.RemoteException

See Also:

isPlanning()

checkInvUseStatusForPlanning

public boolean checkInvUseStatusForPlanning()
                                     throws MXException,
                                            java.rmi.RemoteException

This method checks if the item exist in Inventory Usage Lines in with status STAGED or SHIPPED.

Returns:

- String Status, if the inventory usage status is STAGED or SHIPPED Otherwise null.

Throws:

MXException

java.rmi.RemoteException

checkInvUseStatusForPndObs

public boolean checkInvUseStatusForPndObs()
                                   throws MXException,
                                          java.rmi.RemoteException

This method checks if the item exist in Inventory Usage Lines in with status ENTERED, STAGED or SHIPPED.

Returns:

- String Status, if the inventory usage status is ENTERED, STAGED or SHIPPED Otherwise null.

Throws:

MXException

java.rmi.RemoteException

getStatus

public java.lang.String getStatus()
                           throws MXException,
                                  java.rmi.RemoteException

Returns status at inventory level.

Returns:

status

Throws:

MXException

java.rmi.RemoteException

getCostType

public java.lang.String getCostType()
                             throws MXException,
                                    java.rmi.RemoteException

Returns Item's Cost Type.

Specified by:

getCostType in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

getCostType()

getInvLifoFifoCostRecordSetSorted

public MboSetRemote getInvLifoFifoCostRecordSetSorted(java.lang.String conditionCode)
                                               throws MXException,
                                                      java.rmi.RemoteException

returns InvFifoCost mbo based on the conditionCode passed

Specified by:

getInvLifoFifoCostRecordSetSorted in interface InventoryRemote

Parameters:

conditionCode -

Returns:

an InvLifoFifoCost mbo(maybe a null if the invlifofifocost record specified does not exist in the database yet.)

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#getInvLifoFifoCostRecordSetSorted( double,doubleString)

getInvLifoFifoCostRecordSet

public MboSetRemote getInvLifoFifoCostRecordSet(java.lang.String conditionCode)
                                         throws MXException,
                                                java.rmi.RemoteException

returns InvFifoCost mbo based on the conditionCode passed

Specified by:

getInvLifoFifoCostRecordSet in interface InventoryRemote

Parameters:

conditionCode -

Returns:

an InvLifoFifoCost mbo(maybe a null if the invcost record specified does not exist in the database yet.)

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#getInvLifoFifoCostRecordSet( double,doubleString)

getInvLifoFifoCostRecordSet

public MboSetRemote getInvLifoFifoCostRecordSet(java.lang.String conditionCode,
                                       long transid)
                                         throws MXException,
                                                java.rmi.RemoteException

returns InvFifoCost mbo based on the conditionCode passed

Parameters:

conditionCode -

Returns:

an InvLifoFifoCost mbo(maybe a null if the invcost record specified does not exist in the database yet.)

Throws:

MXException

java.rmi.RemoteException

addInvLifoFifoCostRecord

public MboRemote addInvLifoFifoCostRecord(double quantity,
                                 double unitcost,
                                 java.lang.String conditioncode,
                                 java.lang.String getName,
                                 long matrectransid)
                                   throws MXException,
                                          java.rmi.RemoteException

This method is used by Transfer and Receipt objects to insert the invlifofifoCost record.

Specified by:

addInvLifoFifoCostRecord in interface InventoryRemote

Parameters:

quantity -

unitcost -

conditioncode -

objectname -

objectid -

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#addInvLifoFifoCostRecord(double, double, String, String, int)

consumeInvLifoFifoCostRecord

public void consumeInvLifoFifoCostRecord(double quantity,
                                java.lang.String conditionCode)
                                  throws MXException,
                                         java.rmi.RemoteException

This method is used by Transfer and Receipt objects to consume the invlifofifoCost record.

Specified by:

consumeInvLifoFifoCostRecord in interface InventoryRemote

Parameters:

quantity -

unitcost -

conditionCode -

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#consumeInvLifoFifoCostRecord( double,doubleString)

consumeInvLifoFifoCostRecord

public void consumeInvLifoFifoCostRecord(double quantity,
                                java.lang.String conditionCode,
                                long transid)
                                  throws MXException,
                                         java.rmi.RemoteException

This method is used by Transfer and Receipt objects to consume the invlifofifoCost record.

Parameters:

quantity -

unitcost -

conditionCode -

Throws:

MXException

java.rmi.RemoteException

consumeInvLifoFifoCostRecordRemaining

public void consumeInvLifoFifoCostRecordRemaining(double quantity,
                                         java.lang.String conditionCode,
                                         long transid)
                                           throws MXException,
                                                  java.rmi.RemoteException

This method is used by Transfer and Receipt objects to consume the invlifofifoCost record.

Parameters:

quantity -

unitcost -

conditionCode -

Throws:

MXException

java.rmi.RemoteException

getAverageCost

public double getAverageCost(MboSetRemote invLifoFifoCostSet)
                      throws MXException,
                             java.rmi.RemoteException

This method averages the cost for the display on UI.

Specified by:

getAverageCost in interface InventoryRemote

Parameters:

quantity -

conditionCode -

Returns:

Throws:

MXException

java.rmi.RemoteException

See Also:

psdi.app.inventory.Inventory#getAverageCosts(MboSetRemote )

setAutoCreateInvLifoFifoCost

public void setAutoCreateInvLifoFifoCost(boolean flag)
                                  throws MXException,
                                         java.rmi.RemoteException

Should an InvLifoFifoCost be automatically created if the object is new?

Parameters:

flag - true or false to indicate if an InvLifoFifoCost is to be created automatically.

Throws:

none

MXException

java.rmi.RemoteException

getAutoCreateInvLifoFifoCost

public boolean getAutoCreateInvLifoFifoCost()
                                     throws MXException,
                                            java.rmi.RemoteException

Returns autoCreateInvLifoFifoCost flag.

Parameters:

flag - true or false to indicate if an InvLifoFifoCost is to be created automatically.

Returns:

autoCreateInvLifoFifoCost flag

Throws:

none

MXException

java.rmi.RemoteException

getInvLifoFifoCostRecord

public MboRemote getInvLifoFifoCostRecord(java.lang.String conditionCode)
                                   throws MXException,
                                          java.rmi.RemoteException

Returns the most recent cost date InvLifoFifoCost mbo based on the conditionCode passed

Parameters:

conditionCode - Condition Code

Returns:

an InvLifoFifoCost mbo. Could be null mbo if InvLifoFifoCost record doesn't exist or the most recent cost date InvLifoFifoCost mbo.

Throws:

MXException

java.rmi.RemoteException

setNextInvoiceDate

public void setNextInvoiceDate()
                        throws MXException,
                               java.rmi.RemoteException

Updates the INVENTORY.NEXTINVOICEDATE when necessary. This method will be called by the post validation action of the following attributes FREQUENCY and FREQUNIT.

Specified by:

setNextInvoiceDate in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

setNextInvoiceDate()

getNextDate

public java.util.Date getNextDate()
                           throws MXException,
                                  java.rmi.RemoteException

Calculates the next value for the NextDate attribute, based on the PM's day frequency. This is the date when this PM will next generate a work order.

Parameters:

flag - Indicates whether to use 'extdate' for calculation of 'nextdate'. This flag is set to 'true' if the 'nextdate' is calculated during a work order generation. This flag is set to 'false' if dates are recalculated due to field updates of PM.

Throws:

MXException

java.rmi.RemoteException

addMonths

public java.util.Date addMonths(int addMonths,
                       java.util.Date fromDate)
                         throws MXException,
                                java.rmi.RemoteException

Calculates a date a number of months from the given date. If the day number of the given date is greater than the number of days in the resulting month, the end of the month is used. For example, adding 1 month to 3/31/00 will return 4/30/00.

Parameters:

addMonths - Number of months to add to the date.

fromDate - The date to add the months to.

Returns:

The date equal to the fromDate plus the added months.

Throws:

MXException

java.rmi.RemoteException

See Also:

getNextDate()

addYears

public java.util.Date addYears(int addYears,
                      java.util.Date fromDate)

Calculates a date a number of years from the given date. If going from a Leap Year Day (Feb. 29th) to a non-leap year, Feb. 28th will be used instead.

Parameters:

addYears - Number of years to add to the date.

fromDate - The date to add the years to.

Returns:

The date equal to the fromDate plus the added years.

Throws:

MXException

java.rmi.RemoteException

See Also:

getNextDate()

isConsignment

public boolean isConsignment()
                      throws MXException,
                             java.rmi.RemoteException

This method returns the consignment flag for the inventory record.

Specified by:

isConsignment in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

isConsignment()

updateConsignment

public void updateConsignment()
                       throws MXException,
                              java.rmi.RemoteException

This method checks if the consignment flag can be updated.

Throws:

MXException

java.rmi.RemoteException

checkReconcileFlag

public boolean checkReconcileFlag()
                           throws MXException,
                                  java.rmi.RemoteException

This method checks invbalances reconciled flag for this inventory.

Returns:

true if balances re reconciled false Otherwise

Throws:

MXException

java.rmi.RemoteException

POPRExists

public boolean POPRExists()
                   throws MXException,
                          java.rmi.RemoteException

This method checks if any PO/PR exists for this inventory that are cancelled or closed status.

Returns:

true if open PO/PR exists, false Otherwise

Throws:

MXException

java.rmi.RemoteException

pendingTransactionExists

public boolean pendingTransactionExists(MboSetRemote transSet)
                                 throws MXException,
                                        java.rmi.RemoteException

This method checks if there are any transactions with invoices that are not approved or paid.

Parameters:

transSet -

Returns:

true if invoice exists that are not approved or paid otherwise false

Throws:

MXException

java.rmi.RemoteException

getInvGenType

public java.lang.String getInvGenType()
                               throws MXException,
                                      java.rmi.RemoteException

This Method returns the Invoice generation type.

Returns:

Throws:

MXException

java.rmi.RemoteException

invUpdateCostType

public void invUpdateCostType()
                       throws MXException,
                              java.rmi.RemoteException

This method updates the cost type of the inventory record.

Specified by:

invUpdateCostType in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

invUpdateCostType()

checkBalandPOPR

public void checkBalandPOPR()
                     throws MXException,
                            java.rmi.RemoteException

This methods checks if the balance exists and PO/PR exists.

Throws:

MXException

java.rmi.RemoteException

setEditabilityFlags

public void setEditabilityFlags()
                         throws MXException,
                                java.rmi.RemoteException

This methid is called from View/Edit Consignment details bean to set READONLY flags.

Specified by:

setEditabilityFlags in interface InventoryRemote

Throws:

MXException

java.rmi.RemoteException

See Also:

setEditabilityFlags()

increaseAccumulativeTotalCurBal

public void increaseAccumulativeTotalCurBal(double currentReceiptQty)
                                     throws MXException,
                                            java.rmi.RemoteException

11-14180:increasing the running receipts for the update of MatRecTrans.totalcurbal

Throws:

MXException

java.rmi.RemoteException

getAccumulativeTotalCurBal

public double getAccumulativeTotalCurBal()
                                  throws MXException,
                                         java.rmi.RemoteException

11-14180: return the accumulativeTotalCurbal to MatRecTrans

Returns:

Throws:

MXException

java.rmi.RemoteException

checkComponentCostType

public void checkComponentCostType(MboSetRemote itemStructKitSet)
                            throws MXException,
                                   java.rmi.RemoteException

Checks if the kit components have cost type Lifo or Fifo.

Parameters:

itemStructKitSet -

Throws:

MXException

java.rmi.RemoteException

getStatusSetByMaxvarFlag

public boolean getStatusSetByMaxvarFlag()
                                 throws MXException

This flag return true if the status is set by the maxvar.

Returns:

Throws:

MXException